wallice9111 get's a new body, AKA how an FSE-LX is made Lot's and Lot's of pic's

[PsychoBaller]

Ooooo......

Pretty....

I wish my money supply and flow was enough to buy another Emag..... specifically one of those FESTUS, very very nice.

wuts the final Emag gun weight with that body and no barrel - just the Emag itself?

~da baller

[FESTUS33]

Re: Ooooo......

Originally posted by PsychoBaller
Pretty....

I wish my money supply and flow was enough to buy another Emag..... specifically one of those FESTUS, very very nice.

wuts the final Emag gun weight with that body and no barrel - just the Emag itself?

~da baller

With my stock E-Mag frame, Modified rail, and my
Nitro Duck 90" Mega Reg tank and drop - barrel
7 3/4 lbs.
I think when I get the Frymark battery pack and
finish doing the homespun ULE on the rail I'll
probably come in at 7 lbs even. Ill keep y'all
informed.
Rick

[wallace9111]

in-freakin-credible

[FESTUS33]

Originally posted by wallace9111
in-freakin-credible

So You Like!
Notice I never did do anything to the side's,
if you really want something there I can work on it.
Rick

BTW you'll have a P.M. real soon

[wallace9111]

up for this body

people need to see the artist/machinist that is
Rick

Once again man the more i look at the more i fall in love i can not wait to see it first hand

BTW this guy is incredible for anyone thinking about doing business with him


DO IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Great experience with him, communicated great, and has been honest and trust worthy this entire time.

Thank YOU

[TransMan]

Yo Festus what exactly need to be done to a slugo before it can fit a Classic RT i would liek to know cause im pretty sure my dad could do that for me if not then ill get u to do it after i get my Sluggo.

[FESTUS33]

Originally posted by TransMan
Yo Festus what exactly need to be done to a slugo before it can fit a Classic RT i would liek to know cause im pretty sure my dad could do that for me if not then ill get u to do it after i get my Sluggo.

It has to do with fitting the round Pem nut on the
slug body into the rectangular hole in the RT classic
rail, It may or may not fit as is. If it does'nt,
it will be easier to fit the hole in the rail than the
nut on the body.
Rick

P.S. Thanks Will I really appreciate you're good word's.

[TransMan]

Pem nut..??? Ive never noticed a rectangular hole in my rail umm will there need to be any mods done to the sluggo for the RT valve to fit in it besides making the hole for the banjo bolt bigger?

[FESTUS33]

You dont have to do anything for the banjo bolt,
it does'nt have any contact with the body.
The Pem nut I'm talking about, is the little
threaded thing that is welded to the bottom
of the body that hold's the body to the rail,
with the screw through the trigger loop.
I hope that clarify's thing's for you.
Rick

Now that I think about it You might have to put
a small O-ring between the rail and valve, that
will fit over the banjo to seal everything.
It might be a little hard to find one the right
size, but I'm sure they're out there somewhere.

[TransMan]

ahh ok Thx that helps alot i think ill get one of the Longer sluggos TK said they would make next then start experimenting
*EDIT* also the fact that the RT valve is smaller in Diameter then the Retro or Air valve doesnt matter?

[FESTUS33]

Originally posted by TransMan
ahh ok Thx that helps alot i think ill get one of the Longer sluggos TK said they would make next then start experimenting

Good Idea Trans
If you get the extended body, all you have to do is
bolt the body to the rail and mark it where the banjo
goes. Then dismount it and drill a slightly bigger
hole than the banjo bolt, find a drill that fit's
the banjo hole in you're stock body snuggly,
and use that. Should come out perfect.
Good Luck
Rick

[gcube]

wallice just sold me his emag cant wait till i get the slug body cant wait, thats the beutiful

[FESTUS33]

Originally posted by gcube
wallice just sold me his emag cant wait till i get the slug body cant wait, thats the beutiful

Yah! He sent me a P.M. while I was at work tonight.
He's going to send me you're address, so I can ship
the body straight to you. I'm just waiting for my
brother to finish threading the feed neck, then I
just polish it install it and ship it. Should be
no later than Monday. If you have any plan's to
have it anodized, You have to let me know, so I
don't install the feed neck and I'll have to uninstall
the spring clip and washer.
Rick

[gcube]

polish is good i like it the way it is. thanks

[FESTUS33]

Here They Are
Pic's of the finished body,
it''s ready to ship monday.
gcube either you or wallace9111
need's to P.M. Me You're address.
Rick