Will a Classic rail, E-mag body and a E-Mag valve fit together along with a classic z-grip?
-
Captain of
Team Sleeper
My setup:
Black P/F EMAG-LVL10, Freak, EVO II
Originally posted by -Carnifex- "I tell people, You know what would make that Angel better? Me using it."
My Feedback:
http://www.automags.org/forums/showt...threadid=57308 -
I know the rail, the z-grip and the valve should fit. You may have to slightly mill out the rail to make the body fit. The classic rail has a rectangular slot for the screw to hold the body to the rail. The E-mag body has a round protrusion so the rectangular slot would have to be milled to fit the round protrusion for the screw. Clear as mud? The e-mag valve is just and RTPRO valve as far as I know and that will fit the classic. Just be advised that there are no places for the E-mag battery and such in a classic rail.PROTECTING FREEDOM SINCE 1989
Battlegroup -
The round part of the E-Mag body will fit in the rectangular slot on a clasic rail. It's when you try to put the non-round clasic or Mini body on an E-Mag rail that you have problems.Originally posted by battlegroup
The classic rail has a rectangular slot for the screw to hold the body to the rail. The E-mag body has a round protrusion so the rectangular slot would have to be milled to fit the round protrusion for the screw.
The set-up discribed in the opening post should work without problems."Relax. Don't worry. Have a Home Brew."
-Charlie Papazian
Feedback: http://www.automags.org/forums/showt...threadid=40134Comment
-
There you go. I had it backwards.PROTECTING FREEDOM SINCE 1989
BattlegroupComment
Comment