Calling all AO on a Mission
we've proven that we can do 20bps with paint, we've proven that we can do 30bps without paint. what we need to do now is to make an emagnum do 27bps or higher WITH PAINT and i know how to make it possible.
we need an emagnum with a warp, HALO B or EGGO II, a really big bore barrel and a SCUBA tank.
now coupleing butterfingers ideas with mine i've come up with the plans and no way of pulling them off.
the only way to get an emagnum up to 30 is to do a strightshot with no reg from a half filled scuba tank, that solves the high rate of fire. to get the warp to that speed we need to hook it up to a wall outlet on a voltage meter. crank it up to 13 or 14 volts, right to the limit, and that should help, then get an extra tank and hook up an air assist for the warp tube so the warp doesnt have to push as much. then do the same thing with a voltage meter to the EGGO or HALO except on a lower voltage (about 1-2 volts higher then whats needed) that should feed around 32bps if i'm right.
the big bore barrel is to help get the paint out of the barrel. we need to use a thicker paint that doesnt break easily, non of that brittle stuff. because in order to get that ROF you cant use lvl 10.
i hope someone gets my plan and puts it into good use. video tape your results on MP3 with a timepiece on scene.
LETS DO THIS
we need an emagnum with a warp, HALO B or EGGO II, a really big bore barrel and a SCUBA tank.
now coupleing butterfingers ideas with mine i've come up with the plans and no way of pulling them off.
the only way to get an emagnum up to 30 is to do a strightshot with no reg from a half filled scuba tank, that solves the high rate of fire. to get the warp to that speed we need to hook it up to a wall outlet on a voltage meter. crank it up to 13 or 14 volts, right to the limit, and that should help, then get an extra tank and hook up an air assist for the warp tube so the warp doesnt have to push as much. then do the same thing with a voltage meter to the EGGO or HALO except on a lower voltage (about 1-2 volts higher then whats needed) that should feed around 32bps if i'm right.
the big bore barrel is to help get the paint out of the barrel. we need to use a thicker paint that doesnt break easily, non of that brittle stuff. because in order to get that ROF you cant use lvl 10.
i hope someone gets my plan and puts it into good use. video tape your results on MP3 with a timepiece on scene.
LETS DO THIS
....
Comment