Can a minimag be a "tourney" gun?

[FalconGuy016]

Im actually looking VERY forward to be using my minimag in my next tourny...

[Smoken]

Most Definatly YES. My MiniRetroLX w/ Flatline went up against IR3s, Matrices, Timmys, and E-Orracles yesterday in a local tourney. Score: 680 out of 700 possible in the prelims. So Yeah.
Also it was cheapo field paint too (PB Junkies).

[Peach]

Originally posted by irbodden
They'll have a ROF advantage on you, but it shouldn't be anything that ya can't over come..

Deffinately not!!! If you're planning to go into some tourneys with your RT mini call up the agd store and order some presized pins ranging from .738-.745 Use Whichever one you feal works the best. WIht the smaller pin you can tear up the BPS with the RT valve, Intellifeed is a must. Forget the expensive hoppers, buy a x-board revvy and set the switch so when you pull the trigger, before your gun fires the blades start spinning. Adding a AGD flatline adjustable on in, with a regulator as your grip you can never go wrong. Setting the tank to about 1100 output and the REG output at around 750-875 PSI depending on how reactive you want the trigger.... Personally to show the ref's my marker is semi, ill turn the reg down to about 750, then crank it up for the full reactiveness... I have never thought about another gun to play with besides my minimag with above mentioned, lvl-x and freak kit... well maybe the x-mag but i already have an e-mag and the electronic pulls are not my fancy.... I like a real trigger.

[TransMan]

Originally posted by Peach


Deffinately not!!! If you're planning to go into some tourneys with your RT mini call up the agd store and order some presized pins ranging from .738-.745 Use Whichever one you feal works the best. WIht the smaller pin you can tear up the BPS with the RT valve, Intellifeed is a must. Forget the expensive hoppers, buy a x-board revvy and set the switch so when you pull the trigger, before your gun fires the blades start spinning. Adding a AGD flatline adjustable on in, with a regulator as your grip you can never go wrong. Setting the tank to about 1100 output and the REG output at around 750-875 PSI depending on how reactive you want the trigger.... Personally to show the ref's my marker is semi, ill turn the reg down to about 750, then crank it up for the full reactiveness... I have never thought about another gun to play with besides my minimag with above mentioned, lvl-x and freak kit... well maybe the x-mag but i already have an e-mag and the electronic pulls are not my fancy.... I like a real trigger.

Umm i would say they would have a ROF advantage and y would u want to get another pin is that to make your gun go reactive? So when the refs check your gun u change the PSI then turn it up when u go into a game? Thats almost as bad as someone turning their velocity up after the ref checks them.