Looking for Warps on a Center Feed

[JEDI]

I'm considering putting my warp feed back on my Emag. I've never used it on my new Low Rise body.
Can some one show me their set up with a warp on a no-rise.
I searched and found ton of pics with warps on SFL mags, but I'm looking for set-ups with the
warp adapter "In" the feed tube. Not on it like an SFL set up.
Any pictures or opinions/comments appreciated

[JEDI]

Slackers

[dropkick1]

heres a pic of it on my micro emag, kind of a no-rise. hope this helps, but i don't have my warp anymore, i sold it in september, o well.

ken

[JEDI]

That helps man. Thanks. Thats what I'm looking for. It doesnt have to be the no-rise, but center feed in general. Is that a proteam warp adapter? Will my AGD adapter fit right into the feed cone?

[digitalcave]

Hey Jedi did your boomstick come pre-cut for the no-rise?

[JEDI]

I have one that I had cut (14")by damageinc54, and another (12") that is a center feed barrel. The one you see there is the 12". I ordered it right from DYE. The website allows you to select center feed.

[cledford]

My no-rise Emag is currently at AGD for service - but I'm going to run warp on the center feed. I've noticed that with my Timmy, Shocker, and Cocker I shoot TONS better then with a mag. I actually noticed this years ago with just the cocker and auaotmag. The problem is the power-feed. I sight down the side of the marker (right allong side the barrel) and the bottom of the power-feed (and the warp hose) oclude the natural process of aiming for me. I've found that by running a Warp into a center feed the 2 inch gap beween the hose and the body is more then enough to sight down.All in all, I'm thinking that the no-rise and warp will work great together.

-Calvin

[dropkick1]

yup jedi, that is a pro team warp adaptor, works real well.

ken

[*ArKfEaR*]

Curse you!!!

Dont get a warp.

[WARPED1]

Originally posted by *ArKfEaR*
Curse you!!!

Dont get a warp.

I second the motion.Why make your pretty gun fugly as sin?

[FESTUS33]

I don't have any pic's of it,
but when I ran the warp on my
Twisted Tribal I reversed the
mounting bracket. So the hose
came up from behind with the
adapter at about a 15* angle.
It was very clean and Slim.
Rick

[JEDI]

Originally posted by FESTUS33
I don't have any pic's of it,
but when I ran the warp on my
Twisted Tribal I reversed the
mounting bracket. So the hose
came up from behind with the
adapter at about a 15* angle.
It was very clean and Slim.
Rick

Thats a real interesting option. Hmmm.