egg on norise

[rehme]

hey i am going to use my eggolution on my mag now and i already chopped down the neck and i am wanting to get a no rise when i put the egg on the body to find out how low it will be damn that is really low so i am wonder if any body has pics of a mag with a no rise body with a egg on it with a cut down feed neck THX

[E==Mag MAN]

Will the feed neck even fit in a no rise, My buddies wont fit at all. But he sanded it alot im just curious.

[SlipknotX556]

I dont think an Egg would fit in a no rise, my friends barely fits into the feedneck on his rat impulse, we have to really push the damn thing in their.

[Bucky]

you can gently sand the feed neck so it fits better.

[fire1811]

actually with a norise i had to add a thin bead of superglue around the full unsanded neck to make it hold tight. so if you havent sanded it down yet DONT.

i will get pic up in a few

[jayel579]

you can sand it down to get to fit, and cut about 1/4" of and inch off the bottom the neck. then you are all good.

[fire1811]

here you go in the pic it looks like there is a good deal of room between the body and the botom of evo but its just under 3/4 of an inch so i wouldnt cut too much off.

oh you errr..I have never had any feed issues with the
evo2/norise either you should be happy with it

[fire1811]

again all these ppl telling you too sand down are wrong
this feedneck is huge about as big as prebrasseagle viewloader. like i said i have do run a thin bead of superglue around neck just to hold it on tight

[rehme]

well the problem is that i already cutted the length off of the egg2. Well i guess i could get another feed neck but i am probably going to put my halo B on it. first i need to get a no-rise AGD is out of them and the milled bodys wont come in polish

[Strider]

The feedneck fit my Egg just nice... (Omni's Emag)

[Marchborne]

Originally posted by rehme
well the problem is that i already cutted the length off of the egg2. Well i guess i could get another feed neck but i am probably going to put my halo B on it. first i need to get a no-rise AGD is out of them and the milled bodys wont come in polish

Depending on how far you cut the neck, I wouldn't worry about it. I cut down the neck on my eggo to the point where there's just a sliver of clear neck showing above the no-rise, and it fed fine all day for the last day of the MGO, and every day since.

[jah871]

this isnt a norise but on my dads micro emag we cut it down and we also had to *** a bead of super glue to get it to stay snug.

[Daroach]

here is my Xmag w/ my cut feedneck of my EvoII, i took off about an inch from it. Works just fine!

[rehme]

have you guys got many hopper hits i dont have a feel for my warp feed any more so that is why i am getting a vert body and to stay away from the damn elbos!!! lol

[Daroach]

I went to the Dallas AO meet, and hopper hits where the only way i was getting eliminated. I just got my warpfeed, so i am installing that tonight.