what is the best xchamber

[rehme]

ok i am buying another mag and i am going to run it on co2 for woods ball so i can have a couple of tanks and i am wanting to know what would the best setup or xchamber would be best

[EsPo]

i know system x makes an 8 stage expansion chamber.. and its like 20 bucks, might wanna pick up one of them.

[Phil]

Dont get a 32* expansion chamber. The seals went bad in 3 of them in 6 months.

[bunkermaster10]

xchamber

This one at actionvillage.com looks pretty sweet and seems like its pretty good. And it's kinda small compared to other chambers. And its only 20 bucks.

http://store.yahoo.com/actionvillage/035-4800.html

[RAM3139]

the best overall is the ACI sub-zero. I had one and it never let any liquid in, even when i was holding the tank upside down.

[Muzikman]

Best exp chamber is no exp chamber. Get a regulator instead. The Palmer Stabilizer is one of the best (if not the best) regulator for CO2 use.

[mistwolf]

I'll second this, I ran my mag on a Stab for a few years, and loved it. Only stopping because the X-valve doesn't do CO2, btu the stab is on my secondary now.

jamie

[Will Wood]

X-core 8 stage.

http://countypaintball.com/product_description.asp?item=2547

[bunkermaster10]

yeah if you don't care about spending about 90 bucks for that regulator then thats that best way to go.

[ogre55]

The Palmer Regs are the best in the business. Makes me wonder why anyone would buy anything else, or pay more for something that is not a Palmer for that matter.

One the other hand, why do you need a reg for a 'Mag? They have regulators built into the gun.

Ogre

[warpfeedmod]

Originally posted by ogre55
The Palmer Regs are the best in the business. Makes me wonder why anyone would buy anything else, or pay more for something that is not a Palmer for that matter.

One the other hand, why do you need a reg for a 'Mag? They have regulators built into the gun.

Ogre

I believe to prevent liquid CO2 from entering the marker. No matter how hard I tried (anti-siphon tank even) I still managed to get some into my classic68

[battlegroup]

I use a Cooper-t X-chamber. WWW.cooper-t.com They don't have them on the website right now but i think its awesome. It's basically an adapter for a 3.5oz bottle. it's big but I have never gotten liquid into my gun. I also like the palmer regs. and an anti-siphon bottle.

[ogre55]

Using a 3.5 oz as an expansion chamber is the way to go, if you can gigure out how.

I ran a similar setup some years ago when I had my PMI-3. Get a 2 bottle setup, with an empty 3.5 oz in the front and fell 12 oz in back. The gas would travel from the 12 oz and then expand in the 3.5 oz before enter the gun.

It may have been heavy all all get out but this set up worked famously. I played in below freezing temps without a problem. And the PMI-3 was famous for being a gas hog. With normal single bottle, no exp. chamber setups, the thing would not operate at 40* of below.

Now see what you did. I'm getting all mistly eyed and nostalgic for my older rigs. It may be time to get that bad boy out of mothballs.

Ogre