Wowwee, Shocktech supposedly made the Emag!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rdb123
    i have no ear
    • Oct 2002
    • 1507

    #1

    Wowwee, Shocktech supposedly made the Emag!

    "the sfl emag was produced by shocktech..." "...there is no one else that made it..." "...they use the agd board"

    Basically, he's implying that everything about it was made by Shocktech and that they just use the AGD electronics board. He further tells me that AGD stole the design for the ACE from Shocktech and also the Level10.

    Anyone want to vouch for that? hehe

    -Ron
    Pewter SFL E-Mag #EM01569
    Pewter Shocktech Intimidator


    My Trading Feedback

    Extraordinary Traders:
    Johnny Bravo

    Good Traders:
    fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie
  • PsychoBaller
    Gone are my SFL days...
    • Nov 2000
    • 1952

    #2
    Um.....

    Where did you get that quote from... u should Link the article from where it came from, and who said it...

    Besides.... TK gave the bodys to Shocktech.. so they cant take credit for all of it.

    ~da baller

    Comment

    • Brak
      POOP
      • Sep 2002
      • 1996

      #3
      unless "he" is big brother, i doubt the validity of any of that information. and for the ACE, i believe all ACE's operate on the same basis and design, so somebody with a distorted view of reality could say that AGD "stole" it. and i doubt that shocktech just went on and built a bunch of AGD valves when they could have bought them from AGD? as for the level 10, whoever said that AGD "stole" it from shocktech is a complete and utter moron. sounds like your source is a HUGE shocktech fanboy.
      SIG RULES SUCK REAL BAD AND THEYRE STUPID AND DUMB AND THEY STINK AND ARE STUPID AND I HATE THEM AND THEY SUCK REAL BAD

      Comment

      • rdb123
        i have no ear
        • Oct 2002
        • 1507

        #4
        ...just some kid up in Illinois who is supposedly buddies with Danny Love.

        I was under the impression that shocktech only did the milling for the body.

        -Ron
        Pewter SFL E-Mag #EM01569
        Pewter Shocktech Intimidator


        My Trading Feedback

        Extraordinary Traders:
        Johnny Bravo

        Good Traders:
        fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

        Comment

        • Psycho Chicken
          Registered User
          • Feb 2001
          • 331

          #5
          I hate dumb people!
          This chicken's got a brand new bag.

          C&C Xmag #296
          yellow to black fade
          warped 88/4500

          Comment

          • blembiggity
            blue to black x mag-AGDE
            • Jul 2001
            • 298

            #6
            the ace was developed in agde by the way. people need to stop spreading rumors like that silly little kid.
            nor cal representin


            you are a

            Comment

            • PsychoBaller
              Gone are my SFL days...
              • Nov 2000
              • 1952

              #7
              Ron ????

              How foolish are you to believe a person that says he is "buddies" with anyone ?

              Unless u hear something from a manufacturer's mouth directly, or it is on a statement on their site that is factual (not hype or not able to be proven).... why would u believe anything a random kid says ?

              ~da baller

              Comment

              • brian terry
                Registered User
                • Aug 2001
                • 242

                #8
                shocktech did the milling on the sfl emag.then they sent the bodys back to agd to have all the stuff put in the gun.then agd sent the gun back to them to be sold as the shocktech emag.

                Comment

                • rdb123
                  i have no ear
                  • Oct 2002
                  • 1507

                  #9
                  Psychoballer: I don't hehe. I just posted this up for your amusement.
                  Pewter SFL E-Mag #EM01569
                  Pewter Shocktech Intimidator


                  My Trading Feedback

                  Extraordinary Traders:
                  Johnny Bravo

                  Good Traders:
                  fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

                  Comment

                  • rdb123
                    i have no ear
                    • Oct 2002
                    • 1507

                    #10
                    Originally posted by brian terry
                    shocktech did the milling on the sfl emag.then they sent the bodys back to agd to have all the stuff put in the gun.then agd sent the gun back to them to be sold as the shocktech emag.
                    So what's the story on why they only made 40? Did they originally plan to make a small quantity or did they just change their mind during the production phase that the Emag wasn't worth it?

                    -Ron
                    Pewter SFL E-Mag #EM01569
                    Pewter Shocktech Intimidator


                    My Trading Feedback

                    Extraordinary Traders:
                    Johnny Bravo

                    Good Traders:
                    fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

                    Comment

                    • shartley
                      paintball player
                      • Mar 2001
                      • 9169

                      #11

                      www.ShartleyCustoms.com
                      Custom Paintball Products and Accessories
                      CLICK HERE to Check out our PDU SERIES GEAR!


                      its more like a paper cut that has primadonna's yelling murder... - Glickman

                      Comment

                      • rdb123
                        i have no ear
                        • Oct 2002
                        • 1507

                        #12
                        Hehe I would shartley, but there are too many F-Bombs in it.

                        -Ron
                        Pewter SFL E-Mag #EM01569
                        Pewter Shocktech Intimidator


                        My Trading Feedback

                        Extraordinary Traders:
                        Johnny Bravo

                        Good Traders:
                        fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

                        Comment

                        • cphilip
                          Former Moderator

                          • Jun 2026
                          • 16216

                          #13
                          Originally posted by rdb123
                          Hehe I would shartley, but there are too many F-Bombs in it.

                          -Ron
                          That right there should have told you something. And if Shocktech made the ACE why didn't the markers they put out have them? They did not you know...


                          AGD, where we are so good we can do it with only ONE tube!

                          cphilip.com

                          Comment

                          • rdb123
                            i have no ear
                            • Oct 2002
                            • 1507

                            #14
                            cphillip, yes haha, I used that argument when I had that conversation.

                            Funny how the kid was trying to argue with me that my SFL came with an ACE. Weird because I recall having to send it in to AGD to get one installed.

                            -Ron
                            Pewter SFL E-Mag #EM01569
                            Pewter Shocktech Intimidator


                            My Trading Feedback

                            Extraordinary Traders:
                            Johnny Bravo

                            Good Traders:
                            fcpchop, Xerces, Piccolo, hawpunch, Boble86, NCpaintballer, Chupas2, shrapnel, gump1119, Methos, PunkOff, TheFlamingKoosh, RogueFactor, Jonesie

                            Comment

                            • Mr. T!
                              Registered User
                              • Nov 2001
                              • 379

                              #15
                              People think that because a gun was customized, that company owns the gun. People like that are pretty dumb, they seem to be the ones who start all the neg. rumors about stuff....

                              they are also the kids who make the "Vs" threads
                              Your Mother is a Slot

                              [url]www.Paint-BallAction.com[/url
                              www.TheAngelGuy.com
                              www.Angel-Owners.com[/color]

                              Comment

                              Working...