The New Beast (before paint)

[BTAutoMag]

i took a total of 4 pics but 2 of them crapped out of me so you get to see the new front block and the clearnce issue i solved in the other one. ive spent 10 hours machine time carving down the rail and milling myself a new front and here they are.

the new front end of the beast

[BTAutoMag]

and it took me a while to get the tank to a point that i didnt have to cut the trigger guard and i got really lucky on my second try. yes tats less then 1/1000th of an inch

[madmatt151]

COOL!

Huh huh that's COOL!

[automan39]

thats awsome. i no ur pics didn't turn out but could u get one of the entire gun. thats really cool

[Mossman]

Nice bro. I still don't know why you'd go through all of the trouble for an unshoulder-able setup, but it looks good

Did you attach a seperate ASA to the "beast block" or did you mill that out and thread it yourself?

By the way, the amount of space between the tank and frame is no anything/1000"....its touching

[BTAutoMag]

its not touching. the space is so thin you have to get the camera dead balls even with it and thats the best i could do.

ill see about getting a full pic before the gold powdercoating goes on.

also i dont like shouldering but that is only one of the reasons. i strive to be different and i refuse to be part of the saying that all mags look alike

[BTAutoMag]

oh and thats an AGD asa i had to mill down to fit

[-=Squid=-]

Originally posted by BTAutoMag
and it took me a while to get the tank to a point that i didnt have to cut the trigger guard and i got really lucky on my second try. yes tats less then 1/1000th of an inch

couldny you have just FILED the guard a little bit?

[BTAutoMag]

well i could of, but the tank was so far over it wouldve been touching the dye stickies and i would have had no room for my fingers. theres another thread floating around explaining the reasoning behind my decision

[Creative Mayhem]

Hey BT, first off, nice job! Second, and more of a question.. but can you even get you hand around the grip in between the tank and frame? It looks a little tight in the pics.

C Mayhem

[thecavemankevin]

thats neat and interesting, but i kinda think you will get tired of the imballence of the weight now. Or atleast i know i would.

[BTAutoMag]

Originally posted by Creative Mayhem
Hey BT, first off, nice job! Second, and more of a question.. but can you even get you hand around the grip in between the tank and frame? It looks a little tight in the pics.

C Mayhem

yea there just enuf space where it doesnt get in the way

[BTAutoMag]

heres the full pics. without paint, the grey body will be a side feed once they come out, and the SS will soon be macroline

[BTAutoMag]

... say hi to my best friend jarrods hand

[RRfireblade]

Oh, I get it now....."Beast"



Jay.