Benchmark 2x Trigger...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MCollier
    Tallest Frontplayer EVER!
    • Apr 2002
    • 42
    #1

    Benchmark 2x Trigger...

    I will never dump my minimag. If I ever make some money Ill probrably buy an RT or maybe even an Xmag (when im like 30) but until then Ill settle with my old-school MM. However ive had this piece of crap benchmark 2x Trigger on it for awhile, and its starting to irritate me.

    2 Things - Anything I can do to shorten the trigger pull (other than adjusting the sear cuz I already did that) and anything I can do to stop the side to side jiggling of the trigger,

    Or should I just dump it for an intelliframe.

    Also - I recently got an HPA tanke (68ci 4500 Crossfire). Now I need a bigger dropforward, something that will go 7" forward and 2 down will be nice, right? with that ill probrably just look and experiment but what im more worried about is my Xpansion Chamber. Should I swap it out for a gas-thru forgrip now that its nolonger required. What are the disadvantages to using an xchamber with HPA?

    Thanks for any advice.
    Minimag w/ Hopper Right Powerfeed body, Benchmark 2x Trigger / Frame, 12" Smart Parts Teardrop, ANS Venturi Bolt, ACI 6 Stage Expansion Chamber, 12v Revolution Hopper, Crossfire 68ci 4500 psi HPA Tank, Custom made Drop Forward (kinda like a P&P one).
    Tags: None
    • FalconGuy016
      Divine Right, Pevs @ AG
      • Aug 2002
      • 6127
      #2
      dump it and buy the intelli like I just did on saturday :) very happy

      but to shorten it, you can thread the end of the sear pin and put a barrel nut and locking nut on it, extending the sear

      or you can do the same to the back of the benchmark trigger, but backwards

      to reduce the slop you can punch the pin out where the trigger connects to the frame and put tiny little washers in there or brass shim
      Hey
      AIM: FalconGuy016
      BANG!!!

        Comment

        • MCollier
          Tallest Frontplayer EVER!
          • Apr 2002
          • 42
          #3
          according to my latest fleet statement i have 120 bucks left on my debit. I think im going intelli .

          Trigger pull on that is really really nice I imagine, especially when compared to most other mechanical triggers?
          Minimag w/ Hopper Right Powerfeed body, Benchmark 2x Trigger / Frame, 12" Smart Parts Teardrop, ANS Venturi Bolt, ACI 6 Stage Expansion Chamber, 12v Revolution Hopper, Crossfire 68ci 4500 psi HPA Tank, Custom made Drop Forward (kinda like a P&P one).

            Comment

            • Hexis
              Green Mag Freak
              • Sep 2001
              • 2427
              #4
              I have tried DYE, Benchmark and I-Frame. There is no comparison, I-Frame all the way. You will be a happy MM owner (as I am).

                Comment

                • JAM
                  Back from the Dead
                  • Jan 2003
                  • 953
                  #5
                  absolutely go intelli. they rock.

                  as for trigger distance, you're pretty much SOL, I wouldn't mess with the measurements.

                  As for your expansion chamber, dump it, it does nothing with HPA and just a gas through will make your gun a little lighter probably.

                  -j
                  sigs are overrated.

                    Comment

                    • dropkick1
                      "mary" DDS
                      • Mar 2002
                      • 1220
                      #6
                      yeah, what they said^, haha.

                      ken



                      skateboard=me=8 years

                      good traders:grey goose, coffeynitro, langrage, bond1313, flipirit, rogue factor, kirby, banziamf, thelar, BTautomag, Littmag, thilbo, dirtybunny, thing, xadamx

                      R.I.P Zach Daly

                        Comment

                        • TheJester
                          Registered User
                          • Sep 2002
                          • 753
                          #7
                          yea, i-frame is the way to go. the thing w/ my i-frame on my minimag RT, i only need like 1/2 of the available trigger pull length, so i might take the trigger out, drill and tap it to put a set screw in there as a trigger stop to take up the slack...no use in pulling it 2 inches when i only have to pull 1 to make it fire (no, those aren't actual lengths)
                          AIM- TheJester493 IM me some time

                          take a look at my minimag ....
                          http://www.automags.org/forums/showt...threadid=64837

                            Comment

                            • minimag187
                              I love paiiinnnnntball.
                              • Feb 2002
                              • 756
                              #8
                              You could just wait for the y-frame
                              Smart Parts 2003 Shocker /w Vision

                                Comment

                                Previous template Next
                                Working...