AKA Lighting Bolt

[V-Viper]

i have a quick question about the AKA Lighting bolt. Would the 2000 verson fit 2002 body's? Also the Impact Paintball's Spearhead Body, are they made from a 2000 Autococker body 2002, 1999? Thx. Because I ordered a Lighting bolt and got a 2000 and the push pin and back block dont aline for about half a cm. Thx.

[FeelTheRT]

there are two different model bolts... pre 2000 and 2000 and up. so to answer your question, yes a 2000 willl fit a 2002 and beyond.

[V-Viper]

hhm ok thx. The STO verson of the Lighting Bolt is that longer/shorter? Because im pretty sure my Spearhead is post 2000 but the 2k AKA isnt fitting, any way to figure out the model? Ill try pming manike I had one of these.

[UThomas]

AKA made pre-2000 length, post-2000 length, and evolution length bolts (in that order from longest to shortest).

To check and see if it fits, take the cocking rod off and pull the back block back. Put the bolt in and see if it is clearing the chamber. If it is more than half way in the breach it is the wrong size. Otherwise adjust your cocking rod length.

[Bartman]

Actualy they make several vertions.

But most 2000 bolts will fit a 02 gun as long as you haven't changed back blocks. Esentualy the back block determins the style bolt you need.

If its not fitting your spear head , chances are the back block on hte spear head isn't a 2000+ style back block, and the hole could actualy be further back .

Hope this helps.

Bartman
Team I have no Idea

https://www.ihni.org

AKA Tech