WARP FEED

[MJS1214]

Does anyone out there own a warp feed? Do you like it?

[magic55]

Yeah a lot of people here have warp feed. I like it a lot because it moves the hopper down and it feeds faster

[MJS1214]

how long is the hose on one of those? long enough so you can put it on a 4+1 or 6+1 pack? and how do the balls get through that hose if its going up?

[slayer]

The hose is only like a foot long. You normally mount the warp onto the side of your gun. A wheel pushes the balls up the hose against gravity.
I think it works OK, but I want to give it one more try before making a judgement on it. Since they say it will take three times to get used to it.

[MJS1214]

thanx. it just clips on your gun? and,can you add,like,an extension for the hose?

[PyRo]

It has a mounting bracket that goes in the same holes as your dropfoward. You cannot use too long of a hose, you want to use the shortest possible, because the moter is only so strong. You couldn't get it from your harness to your gun.

[2000Sabre]

The Warpfeed mounts on your gun using a mounting plate. This plate is attached to you grip frame where the ASA adapter is. You have to remove the ASA adapter, put the mounting plate on and then remount your ASA adapter. Essentially what you end up with is the botton of the grip frame with the mounting plate between the ASA adapter and the grip frame. You may have to replace the original ASA screws with longer ones to accommodate for the additional thickness of the Warpfeed mounting plate. The Warpfeed has two fastening holes located on the top which are used to attached the warp to the mounting plate. There are two feed tube holes on the top. One is used to run a flexible tube from the warp feed to your marker and the other is used to install your revy or whatever hooper you use. It's fairly simple to install and you'll like the performance it will give you.

[magman007]

Just to let you all know, they are working on a warp pack! it is so cool, we saw it at the iao, this man with 1 arm made it for him seld so he sould play, it i like a back pack with a revvie melted to the botom and a warp feed attached to it! Then there is a realy long hose for the guy to mount it onto his gun! i plan to get one when they come out!

------------------
you ever notice how elves do everyting???

[MJS1214]

all that work just to put a warp feed on an E-mag? also,does the hopper ever fall off the warp feed?

[squall]

Does the hopper ever fall off your gun? The hopper fits securely into the warp feed...

[MJS1214]

does anyone have a picture of they're mag with warp feed? i only need one pic. thanx

[TheTramp]

Do a search on the Warp. There are pics of Warps on all sorts of guns on this forum.

------------------
"Relax. Don't worry. Have a Home Brew."
-Charlie Papazian

[FeelTheRT]

Originally posted by MJS1214:
Does anyone out there own a warp feed? Do you like it?

Yes, i happen to use an AGD Warp Feed on my Autococker and it works great! I love it, no more feeding problems and there's no hopper sticking out.

[Army]

Uh...top of page, click on the blue sponsor link to see pic of Warp on E-mag.

You DO know that this site is owned and operated by AGD, don't you?

------------------
EIB

[mag wannabe]

hey I g0ot a question... I've seen warps going into the bottom of the powerfeed... HOw does that work? do you just put the plug in the topa and attach the hose? thanks
-perry