The Buck Stops Here II

[speedyejl]

OK well most people know about how Automags have an upgrade to them called the Level 10 kit, Impulse owners have something called an LPR. Honestly I was able to get my bolt to stop on a $20 bill, pencils, my finger, paintballs, etc. It was a amazing. I will try to get a video up soon. In theory most people know that this can be done, but some people have said that it can't happen because the bolt will be moving to slow to hit the hammer normally. It really works, no lies.

(don't try the finger thing at home)

For reference
Dwell: 15 or 14
Max Flow:200psi
LPR: The LPR was set as low as it could go while still cycling nicely

Voodo Bolt
Eclipse Hammer+Shaft
TI Pin
Stock Valve
Micro Rock

[PzYcO]

as long as there is some resistence on the LVL10, it wont fire, i had trouble with that in a tourney where my warp would jam in like 1 & 1/3 balls and my gun wouldnt fire....bad situation =P

[punkcmonkiez]

i was playin a tourney a few weeks ago and i ran into the problem of a jammed ball half in the breech and half out cause i was outshooting my hopper and the level ten wouldnt jsut break it. so with my quick field enginuity i just took my pf plug out poked that mofo through with my finger and just shot through the break in my barrel. and it worked quiet well until when the game was over i find that theres paint all around the ouside of my barrel and it wouldent come out so i had to take apart my gun just to get the barrel off.

[RRfireblade]

Re: The Buck Stops Here II

Originally posted by speedyejl
OK well most people know about how Automags have an upgrade to them called the Level 10 kit, Impulse owners have something called an LPR. Honestly I was able to get my bolt to stop on a $20 bill, pencils, my finger, paintballs, etc. It was a amazing. I will try to get a video up soon. In theory most people know that this can be done, but some people have said that it can't happen because the bolt will be moving to slow to hit the hammer normally. It really works, no lies.

(don't try the finger thing at home)

For reference
Dwell: 15 or 14
Max Flow:200psi
LPR: The LPR was set as low as it could go while still cycling nicely

Voodo Bolt
Eclipse Hammer+Shaft
TI Pin
Stock Valve
Micro Rock

Mmm, Vision?

Jay.

[PigSweat]

At that low of pressures, there's no way you could shoot fast w/o shootdown, believe me, I tried it. Your efficiency must be crap, too.

[Havoc_online]

Pig is right, the softer you make it the more you limit your ROF. It's not hard to make any marker soft on paint, the trick is to do it @ 20bps. Level 10 = 2 speed bolt

My LX will pinch a raw egg yolk.

[speedyejl]

I'm still shooting around with it, from what I've seen I'm not getting shootdown at 13bps. Not to say it won't happen higher up but it works for me. Anyhow I am not tottaly concerenced with it, just figured its cool. My HALO B has never let me chop, I'll keep on trusting it. Besides about efficencey I don't think that the way I have it going it could possibly worse than a Mag's eff