Warp LEFT Breaches Just Put Up in Store!!!

[PsychoBaller]

Originally posted by hawpunch
nato,
i'm thinking that using the smaller diameter lx bolt might be part of the problem. i ordered my breech...i'm thinking about sanding down the inside enough so that the sfl bolt will fit. what do you think?
aloha,
jae park

Hawpunch..... we can't use regular LX bolts in our SFL's, thats why we got special (larger diameter) SFL LX bolt kits. I was told by whoever I talked to in the Tech Depart when my SFL was in for service, that as a result of the bodies being larger on the inside by a small degree, we had to have the special LX bolts installed (larger by about .10" or something like thatif my memory serves me correct).

~da "sux for us, I really want a Warp Breech that works" baller

[hawpunch]

psychoballer,

that was my point. i think the smaller diameter lx bolt must be the problem with breaks nato is getting. i think the only solution that we sfl owners have is to get a warpfeed breach and then sand down the inside to accomodate the larger bolt. i'm going to try it with the one i ordered. it really sucks though that the sfl people are not getting the product service and have to wait behind the xmag owners. i understand that agd would like to increase sales of its xmags, especially at this critical time when exposure is highest, but i bought my sfl with an expectation that we would at least get the same product support. sfl emags were the first xmags. i understand that they don't want to spend the extra money to machine the breaches differently than the xmags, but it is extremely frustrating as a customer. i'm not sure why they didn't keep the sfl diamter in the xmags...this would have allowed them to make breaches of one diameter and made things more consistent.

aloha,

jae park

[PsychoBaller]

sigh ........ all these happy Xmag owners with their warp breeches. 90* adapters should only have to be used on Non-Xmag/SFL guns that can't adapt the way of changing Breech Modules. We should be able to have workable ones made, i mean there are only 30-35 of us heheh.....

Anyways... how come Load and Kila have Warp Breeches that work..... whats the deal with theirs?

[hawpunch]

that's a good question. i know kila made his own breach (at least i think he did). load got his from a guy that bought it from europe. i'm not sure why his works with the lx bolt.

aloha,

jae park

[magman007]

OK, origionally, the extremes were bigger in diameter, thats why the sfl's are. the first warp breaches (killa and loads) fit, because they were made for the "extremes"

[nato]

To emagslurpee...

Can't you just fall over and DIE??? I'm coming for you!












N.A.T.O.

[rdb123]

Originally posted by hawpunch
...i think the smaller diameter lx bolt must be the problem with breaks nato is getting....

I'm using the smaller bolt; no chops, nothing. I've put nearly 8 cases through it and I maybe only get one barrel break at the tip in each case. This is also using crappy paint.

EDIT: but yes, I want a SFL warp breach. =)

-Ron

[nato]

I'm still here guys! If you can help then that would be great!
N.A.T.O.

[rdb123]

Originally posted by nato
I'm still here guys! If you can help then that would be great!
N.A.T.O.

Try a HALO B or put in dual ball detents. I had alot of problems like yours before I did those two things. Now the thing hums like a bird.

[hawpunch]

nato,

i'd like to help, but my breach isn't here yet. i'm going to order one of the smaller diameter lx bolts and try it out since rdb123 isn't getting any chops using it. i guess if i get chops, it has to be the design of the warp feed breach and its incompatibility with the sfl due to some odd reason. we'll see if we can set you straight nato :).

aloha,

jae park

[rdb123]

Jae, I hear that the SFL bolt wont even FIT into the current warp breaches because the bolt is too big.

[rdb123]

ERrr, nato, disregard my previous posts about a HALO B since I didn't realize you were using a warpfeed breach hehe. I was thinking that you were using the standard vertfeed breach like me.

[hawpunch]

yes, but one of the smaller lx bolts should....i think those are the ones they are using for the xmags currently. its either that or i sand down the inside of the warp breach like i said in one of my previous posts. what do you guys think will be the better option?

aloha,

jae park

[rdb123]

I'd just switch the bolt for whenever you are using the warpfeed module; that way, it will be a perfect bolt-to-breach fit.

[hawpunch]

ron,

kind of crazy that now we're relegated to doing bolt to warp breach fits (first it was paint to barrel, now this) :).

aloha,

jae park