Haven't been here in a while, here's a fun one........

[Punisher]

Three Regulators
One ram
One 4-way
unlimited Grin-factor.

This is a pump-gun that REQUIRES nothing less that a HaloB or a Warp!

[Brak]

I'm speechless.

[joeyjoe367]

Holy moo-goo goo-goo!

[Load SM5]

Wow!

Care to explain some of that?

Welcome back Punisher.......

[yeahthatsme]

das da coolest ting i ever did see....

[halB]

ahhh i remember this, the one with the 3 color anno that came out wrong, yet came out beautifully. i also remember drooling prousely and complimenting you repeatedly
lemme do it again
you truly are a god of airsmithing.

[Punisher]

Thanks guys! It's my personal marker so I don't get a lot of time to work on it.....damned priorities anyway! I finally finished the last of the plating and the polishing on the pump handle.

Here's a run down starting with the obvious:
1) Automation: Let's face it....that's what this is all about, making that IR3 your *****!
2) Matching tank: Go all the way or GO HOME!
3) Anodizing: Gotta look the part, no?
4) Built in regulator: with the bolt locked, it makes velocity adjustments really nice. As well, in conjunction with the reg on the tank itself this gun is +/-2fps with decent paint...doesn't have to be great, just decent. I'll take those numbers!
5) Trigger stops: A 3/32" trigger pull is pretty damned nice.
6) Heavy valve work: {XXXXXXXXXXXXXXXXXX}
sorry, can't spill all the beans. It'll support 13+bps without dropoff. NOBODY else does this....nobody!
7) Custom hammer: Works with the above mentioned valve work, it's also 15% lighter. Stripped, polished and replated in chrome (hard).
8) Modified bolt: much less stack pop means faster feeding. Stripped, polished and replated in chrome (hard).
9) ICD 45/68 grip frame. it's a full 3/4" thick and flat on the bottom. For most applications I like the CCI frame just fine. Some call for more beef!
10) Built in ball detent :no need for detent rings and it'll never foul.
11) Yellow main spring and a custom valve spring allow for very low cocking pressure.......which makes it very hard to chop a ball on the off chance of my Halo B miss feeding (hasn't happened yet)
13) There is no #13
14) Extensive kitten lickin' by specially trained kittens.
15) Once held against the naked breasts of a VERY good looking woman!

[la690]

omg. im about to cry.

[mykroft]

So, here's the kicker.

How much would that cost me (TRPC member if that matters)?

[Mag Master 04]

wowers

what is that...never seen anything like it...lol

[HoppysMag]

hey pun, showem the signature series....

[ChuviDuvi]

god man... what a piece of machinery.... is this for sale? this is extremly nice... how does it shot?

[Punisher]

la690: Oh man...I'm outta tissue too........

Mykroft: I'd be happy to build one for you. I will ask though that we negotiate prices in private. Not only for the sake of good form, but also because I don't wish to upset the admin. Hit me with an E-mail and we'll chat about all the possibilities.

MagMaster: It's a Phantom with my assisted pump setup. Basically the ram does the actual cocking and the pump handle only manipulates the 4-way that controls the beast.
It's ungodly fast, requires a high end loader to say the least.

Hoppy: Ok, here's some fun pics of the factory authorized Signature Series Phantom:




ChuviDuvi: Thanks! This particular one could be sold, but I passed up a cash offer for $1800. It'd have to be a goooood offer. C'mon man....nekid boobies touched this gun!

On a side note: Just for those who may not know. I work on any marker, these two just happen to be two that I really like.

[BlackVCG]

Okay, I have to come over to your shop during Spring Break in a week. :)

[Punisher]

heh....I get that alot!