Length of cocker threaded barrel in ULE body ?

[CFD323]

Can anyone tell me what overall length difference I'm looking at going from a standard twist lock 14" barrel to a cocker threaded 14" barrel. The twist lock barrel length counts the breech in its length whereas the cocker threaded barrel does not. I need to know since I'm ordering a cocker barrel for my ULE body and I like the overall length I currently have with the twist lock 14" barrel in the stock Emag body and I don't want to add much more length to the new setup.

In other words let's say my Emag with standard twist lock 14" barrel is 20" long. How long would it end up being with a 14" barrel with cocker threads ? Would it still be an overall length of 20" or would it be a few inches longer ?

[automag_20]

I believe it should be about an inch longer. If im wrong someone correct me on this.

[FutureMagOwner]

its about an inch from the front of a slug body to the cocker threads and i assume that the ULE will be directly at the cocker threadings. so im estimating it will be about 1 inch longer as well

[personman]

I believe it should stay the same.. I think they mesure it from where it comes out the body.. Its just that a twist lock adds 1.5" but that 1.5" goes into the body so its still 14".. all you see is 14" of the barrel but its really 15.5.. on cocker it should still stick out 14"..
Someone correct me if im wrong.

[Peach]

My twist lock freak was 15" outside of the body. When I measured a cocker one, it was about an inch or so shorter. I only know for sure with the freak... but they should be the same length.

[automag_20]

The twist lock does not add 1.5 inches. I have a 14" boomstick that is the same as my friends 14" spyder barrel.