Autococker grip frames on automags?

[Teen]

I've been seeing autococker grip frames on regular automags. can you do that or do u have to customly drill some holes in your body rail?

[FalconGuy016]

Where did you see this?

[Teen]

i've seen it before on the internet, and i just saw some on these forum with hinge trigger frames. i was trying to find the thread again so i could link it to here but i can't find it. they had an autococker front block kit too.

[CameraGuy]

You're probably thinking of the picture of one of Punisher's Mag-Cocker hybrids (the original with a single trigger cocker frame is about half way down the page on Punisher's site).

http://airsoldier.com/~punisher/gallery.html

[Teen]

yea, thats it

[FalconGuy016]

[ezrunner]

history

lo' many moons ago Budd Orr and Tom Kaye got their heads together and did their grip frames at the same time to save money.

So yes the frames will fit. I don't know that your sear will fit in all cocker frames.

So the hole spacing is exactly the same!

-rob

[cphilip]

Yep! back in "the day" they shared most of the same things to a point.

[piccolo_dbz39]

so, if i wanted this "magocker" jobs done, how much would it cost???

[cphilip]

Ask Punisher or Doc. They do that kinda stuff.

[personman]

Punisher did that peticualar model. Its going to cost you alot of money, and in my book, its pointless.. but it looks cool.. and will defentally draw attention.

[piccolo_dbz39]

yeah i bet ya it is pointless, but my buddy wants to get one i odubt he'll get it if it'll cost alot

[pbguy888]

Punisher quoted me between 250 - and 400 depending on frame and some other veriables

[nerobro]

Re: history

Originally posted by ezrunner
lo' many moons ago Budd Orr and Tom Kaye got their heads together and did their grip frames at the same time to save money.

So yes the frames will fit. I don't know that your sear will fit in all cocker frames.

So the hole spacing is exactly the same!

-rob

Well... not quite. Sheriden came first. Bud used sheriden frames origianlly, then went into production for himself. Using the same sear, trigger, and hole spacing. later came the autococker and re-engineering the guts of the frame to work with a sliding trigger. There was no coming togother of minds on those frames. It was just convienant for TK to buy frames from worr ;-)

This even goes to the point of when AGD started their carbon frames, there were hopes that AGD might become the OEM for WORR..... it didn't quite work out that way.

As for the mag sear fitting a cocker frame.. well no. it won't work. The mag sear is mounted in the rail. Now.. you might be able to get a sniper trigger frame to function on a mag.. or even a slider frame to function on a mag with some "slight" modifications.

[Punisher]

Wow...just stumbled onto this one....

A cocker slide frame can be run on a Mag, using the Mag sear (still located in teh rail) for a slide trigger mag. Easy actually.

As for my conversion pictured above:
The trigger only manipulates the 4-way. There's a ram internally that cycles the sear itself. When running a 4-way like the shocktech bomb or PPS quick switch you end up with a trigger that's electro short....but no batteries.

So...it does have a purpose. While it may not be for everyone, it's certainly fast and fun.