GZ Timmy + Equalizer + Roller Trigger METHOD + Stock grooved Trigger = 20 CPS

[Jack & Coke]

Hello again!

Inspired by AGD's developement of the roller trigger

...I decided to upgrade my GZ Timmy with an Equalizer (since I have to wait forever for an XMAG!!!!) and see if I could duplicate the insane ROF AOers were acheiving via the "roller trigger" method... of course, since I don't actually have a roller trigger, I would have to do this with only the stock grooved trigger that came with my GZ.

First, I must say, I REALLY LIKE THE STOCK OLD SCHOOL GZ TRIGGER!, it's got plenty of play, and the grooves are just right - not too deep, not too shallow.

When I fire my GZ via the roller trigger method (as taught here on AO), I noticed I'm actually firing the gun 4 times with each finger stroke.

If my finger cycle starts at the bottom...

The gun fires once when my finger strikes the trigger at the middle of the stroke.

The gun fires once when my finger strikes the trigger at the top of the stroke.

The gun fires once when my finger strikes the trigger at the middle of the stroke.

The gun fires once when my finger strikes the trigger at the bottom of the stroke.


Thanks AO for your inspiration!

Wurd!

[Jack & Coke]

Sound clip (zipped wav file)

[Jack & Coke]

sound file analysis...

[SlipknotX556]

Very nice.

[rehme]

i seen people with matrixs do that before but it did not sound that fast

[Jack & Coke]

I think the best thing about this is that it's SOOOOOOOOOOOOOOOOO easy and effortless to do.

Using the traditional finger walking method, I struggle a lot to maintain a consistant string. If I'm lucky and my fingers and knuckles don't seize up on me, I figure I can hit around 7-10 cycles per second. Not too fast compared to today's super finger walking mofos.

However, it is really really really easy to gitty up to 18-20 cps using the AO roller finger METHOD.

Did I mention it's easy?

Cheers!

[SlipknotX556]

By the way coke, how do you like your gz?

[darklord]

Very impressive. I like that little animated pic, lol

What's the equalizer? A board for timmies? Is it the one that has an unlimited ROF/BPS setting? Sorry but I'm a timmy newb.

[Jack & Coke]

Originally posted by SlipknotX556
By the way coke, how do you like your gz?

I LOVE IT!

Of course I love ALL my guns also! I've said this before, I enjoy playing with all my guns for different reasons.... even my 18 bps Tippy M98 RT.

As far as my GZ, it feels really nice, and performs GREAT! I'm really happy with it. I must say though, I'm very patient, and don't mind tinkering and performing routine maintenance on stuff... so the GZ is no pain for me. If you don't know, Timmy's require much much more maintenance and TLC than mags do. But I don't mind.

(I'm talking about misc. maintenance and problems with the cup seal leakage, ram bumper replacement, bolt position, noid, wires, regulators, etc.)

Timmy's are great guns! But so are all of the other high end gun! heheh... i guess that's what you should EXPECT if you fork over $1,000+ for a paintball gun - whether it's a TIMMY, XMAG, ANGEL, E-BLADE! They is all good

[Jack & Coke]

Originally posted by darklord
Very impressive. I like that little animated pic, lol

What's the equalizer? A board for timmies? Is it the one that has an unlimited ROF/BPS setting? Sorry but I'm a timmy newb.

This is the WAS Equalier => http://www.wickedairsportz.com/products/equalizer.htm

[img]

http://www.wickedairsportz.com/images/equal3a.jpg

[/img]

What is the Equalizer?

The Equalizer is a tournament legal, semi-only board for Bob Long's Intimidator series markers. This board has been approved for use by Bob Long himself, which means that by using this board you will not void the warranty of your Intimidator. This board will work in all current and future Intimidator models. This upgrade board increases the rate of fire and offers numerous other features...

You don't have to believe all of WAS BS hype, just know that the board kick butt and rocks!

[PsychoBaller]

Mannn.......

I wish I had the funds right now..... I'm actually down to only one gun, that being my SFL. I need some sort o backup, but need to sell some stuff first.... (ahem.. like in my sig.. heh)... But my first backup consideration would be a 2k2 GZ Timmy, just like the one u have.

I'm not into the other models with all the fancy dragon milling, and swervy crap... Just a 2k2 GZ Timmy, nice and plain. My teammates is sweet. Light, trigger is nice, etc.

~da "wishes he had a little sister to sell" baller

[manike]

That's exactly the way I shoot my Ironmen Intimidator also (and my X-mag) when I want to throw paint.

With my timmy and with a Halo B on top I can shoot the whole hopper at 17bps in one long burst of paint...

I was playing mid/front yesterday and shooting around 7 pods a game in a 7 man event... some of my back players were only carrying 5-6 pods

[Jack & Coke]

Re: Mannn.......

Originally posted by PsychoBaller
...I'm not into the other models with all the fancy dragon milling, and swervy crap... Just a 2k2 GZ Timmy, nice and plain...

How about 1/2 GZ and 1/2 Dragon?

Here's my fav Timmy... it belongs to "unseen" from PBN:










manike,

That's just insane! How do you like your Timmy? Can you discribe any differences between your Timmy and your Xmag? Feel? Maintenance? Performance? Reliability?

Thanks!

[SlipknotX556]

That is the most sexiest timmy I have ever seen.

[darklord]

Hey, speaking of GZ, aren't they coming out with their own matrix? Heard it was supposed to be pretty nice...