AGD (company) install X-Valve for me???

[piccolo_dbz39]

I was wondering. if i bought a x-valve with level 10, if i sent in my gun would they be able to install it and tune the lvl 10 for me, i have a fear i'll totally mess up everything in the gun if i tried. if they will install it, how much???

[shartley]

Re: AGD (company) install X-Valve for me???

Originally posted by piccolo_dbz39
I was wondering. if i bought a x-valve with level 10, if i sent in my gun would they be able to install it and tune the lvl 10 for me, i have a fear i'll totally mess up everything in the gun if i tried. if they will install it, how much???

[Mossman]

Also, level 10 may need continual tuning, every few times on the field you may want to drop a smaller carrier in, until its broken in. It's a lot easier to make small modifications like that if you actually know how the thing goes together, and putting it in yourself would do that.

Literally bro, there's nothing to it. If you haven't watched miscue's video, watch it.

Basically you take a nickel, take off your PT tip, tap the valve upside down, knock out the PT spacer, then pull out the O-ring in there with something small and skinny.

Then you put in the white backing washer from LX, drop in a 1, 1.5, or 2 carrier with an o-ring installed in there, whatever seems to give you a bit of resistance on your bolt stem thing, but not too much/too little. Start with no shims, and the short spring, and just hand tighten the new PT tip on there and see if she works.

also a dab of oil on the carrier o-ring works wonders.