My new X-Mag has version 2.1 software and seems to be limited to 16 bps. I have seen others on this site whose X-Mags are 20 bps (RamboPreacher).
Which should it be?
Which should it be?
-
-
well mines 24 with ace on, 16 ace off. the newest 2.21 i think is the 24 bps as well... i have the shock tech softwear so....
Originally posted by Tom in reffrence to a post saying he acted like my dad...
"That's right!
WHO'S YOUR DADDY!!"
ALL QUIT AND NO GO!!! Team Icky Forest-Shatnerball 2003!!!
www.tunamart.com
DONT SUPPORT HYPOCRITICAL MISSLEAD YOUTH, BOYCOTT HK
-
24 with the ACE on, 16 without.
edit: ah, you beat me, magman007
Good Traders: SupaTravis, Joeyjoe367, biker, Zenwood, arabian ape, beefstew, timmy63, ah137, kilaueakid, Will Wood, Remington, DicksonDood23, CPhilip, Fritzy, Dirtybunny, LittlePaintballBoy, JadedT, ChucktheMAGician, TheFlamingKoosh, lgavin
My Feedback Thread
Out of the sport... missing it.Comment
-
You need to turn the ACE on, and then (and only then) can you up the rof to 20+Comment
-
not that it really matters...but what is the ace thing?
Comment
-
ACE= anti-chop eye, it's a sensor in the breech of the gun that detects whether or not a paintball is fully into the breech. It's an anti-chop mechanism found on most electronic guns (known as vision on the imp, COPS on the IR3, PDS on bushies...). The x-mag has a level 10, as well.Originally posted by Mr.Minus
not that it really matters...but what is the ace thing?
Good Traders: SupaTravis, Joeyjoe367, biker, Zenwood, arabian ape, beefstew, timmy63, ah137, kilaueakid, Will Wood, Remington, DicksonDood23, CPhilip, Fritzy, Dirtybunny, LittlePaintballBoy, JadedT, ChucktheMAGician, TheFlamingKoosh, lgavin
My Feedback Thread
Out of the sport... missing it.Comment
-
Could you technically just use a regular bolt and take out the level 10 (for effieciency) and still have no or veyr very few chops? Is the ace good enough for that?Comment
-
i think the regular bolt is just harder on paint in general. i wouldnt go back to it.
E-magnum lx warped halob
z-grip ptp micromag
ptp f\x sleeper cocker
my emag hiku
cockers shoot farther
ouch ouch ouch ok im out
damn an other emagComment
-
Mine just left the factory last week; I would be surprised to find that it did not have the latest version of software.Originally posted by magman007
well mines 24 with ace on, 16 ace off. the newest 2.21 i think is the 24 bps as well... i have the shock tech softwear so....
So, threre is a 2.21?Comment
-
Ben keep hitting the top button on the back of the grip frame until you see "ACE" in the display window. Click the bottom button if the display says "OO" until it says "01". Then click the top button until you see "BPS" then click the bottom button until you get to "24". Note there is no 02 setting as stated in the instructions in the CD. Hope this helps
X-Mag Black to Red Fade - Warped
RT Pro - Warped
"The Mags are back in town"Comment
-
OK, what happened to ACE Mode 2...it sounds like it would be the best:From the X-Mag CD-ROM
Mode 2 is the mode you should be using with your X-mag. This mode is automatic, and requires no user adjustment. You can use virtually any colour paint, even 2-colour paint, and you can even mix colours together in the loader...Comment
-
Is this a Euro X? If so then you will have ACE modes 00=off, 01=factory service mode, and 02=on. In either 01 or 02 you should have at least a setting for 20 bps. I got mine back and the software now allows for 20bps in 00 or ACE off mode using 2.21.
Hope this helps. Again this only pertains to Euro software.Comment
-
u can program your x-mag with the cd that it comes?? or the cd is only the manual??Comment
-
Just the manual.
Comment
-
2.1- US Xmags
16bps- ACE Off
24bps- ACE On
ACE- 00 & 01
2.21- Euro Xmags
16bps- ACE Off
24bps- ACE On
ACE- 00, 01, 02
2.4- All Xmags
20bps- ACE Off
24bps- ACE OnComment
Comment