building a e/x mag

[])arKNe$$]

im going to build a e/x mag from scratch these are the parts i think im going to use but correct me if they arent the right things price doesnt matter i just want a super mag

x valve with lvl 10 black
cocker barrel threads angel feed port threads gloss black???
x mag electronics (battery, grip frame, etc.)
shochtech medium d/f gloss black
wdp gated feed
macroline
agd flatline 88 4500
dye tank cover
black halo
anything else please tell me.

[darklord]

If you mean building a ULE mag, then yeah, that's what you need, except add a body rail. Good luck getting a hold of x-mag electronics.

If I were you, I'd just buy a colored e-mag (comes stock with ULE grip frame and ULE body rail), then get an x-valve if it doesn't already have one, and a ULE body, then you're all set.

[datapimp69]

Originally posted by darklord
Good luck getting a hold of x-mag electronics.

all the items he wants are for sale in the airgun store.

and i mean everything. down to the wiring harness.

it will just cost a lot more then if he just bought the gun and a ule rail.

[BTAutoMag]

you cant get the grip frame in there

[darklord]

Originally posted by datapimp69


all the items he wants are for sale in the airgun store.

and i mean everything. down to the wiring harness.

it will just cost a lot more then if he just bought the gun and a ule rail.

Ok link me to where you can get the 2.0/2.1 board, which has the ACE, which is stock on all x-mags. And the negative battery post isn't in the store, either, he'll need that.

[datapimp69]

the negitive terminal is the same as the positive. the pos just has nylon washers on it the frame is the ground plane.

the board is in the store, and come on guys this is AGD if you call them im sure they will hook him up with what he wants.

but he will pay more for it.

if you look at the parts list ( the one in print) it has all the parts on it. they just havent gotten everything in the online store.

[darklord]

No offense, Data, but I find it very hard to believe that AGD would be willing to part out some of their X-mag ACE boards if they are already having a tough time making the actual X-mags...

[PzYcO]

dark, they probably have a few hundred of XMag ACE boards in stock, just the reason xmags are slow production is because of the bodies from europe..they have all other parts besides the bodies at the factory i think

[magman007]

Data, the positive is not the same as the negative... one of them can be screwed out, the other has to be drivin out i believe


they are also different sizes

[cphilip]

What kind of body did you intend to use? If its a ULE then you need a Rail.

You would need a Grip frame that is milled to accept the ACE board. And those I am not sure are the ones in the store.

Then you need them to sell you an ACE board...

But you could do a ULE Emag with a ULE Body, ULE grip and Emag Rail set up from stuff in the store.

Your gonna probably end up with more than you could buy the thing for.

There is a lot of parts in the Emags "E" stuff you didn't list all the way out. Not only just the Board but the Selenoid, Hall Effects Sensor and HES covers, Emag Sear with plunger, Sear pin screw, battery posts, Magnetic Trigger if its not in the Grip you buy (but I think it is) plus you need Trigger return Magnets, Battery cover and some wire. All that wiring requires some soldering. And the various screws of course. Oh and you even need to buy Grip covers seperate.

[Tunaman]

You would be a wise man to price it all ou first before even partaking in this adventure. The REAL cost will certainly suprise you.