Hopper NEEDED for Warp feed?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Bubonic Plauge
    Magasaurus Rex
    • Feb 2003
    • 96
    #1

    Hopper NEEDED for Warp feed?

    Whats up guys and gals?

    Ok, I am soon acquiring a warp feed, never had one before. I need to know if my hoppers are going to feed sufficiently. I currently have a Richocket 2K and a 9v clear revy.
    I want to know if the revy will feed fast enough, I dont feel like paying $ for a Halo atm and the Ricochet is ugly.

    Thanks,
    CraigEgg
    Tags: None
    • Duke Henry
      Team SYNDICATE
      • Jun 2002
      • 542
      #2
      It should be o.k. for most people. Remember that the warp can feed at insane rates (not to mention removing a lot of your profile), but since your hopper feeds at a slower rate you are limited to 12+ BPS bursts.

      You will have to allow for your hopper to catch up after you fire off a crazy burst.

      Most people that I see with warps run with Revy's or Rico's and don't have major problems.

      I run mine with a HALO-B and an Evo 2, but I wouldn't worry too much if I had to run a Revy.
      TEAM SYNDICATE

      My Ebay Feedback

        Comment

        • rehme
          varmit slayer
          • Mar 2002
          • 1480
          #3
          i think you just get new shells (maybe) and get the X-board and some new paddels and the 9v should be a 12v but dont quote me!


          good buyers/traders: becercom tunaman pullman richie CoFFeY[NiTrO]

          www.vaporworks.net the best bushy upgrades!
          www.infowars.com learn the truth about the goverment.

          My Feedback

            Comment

            • Hunter
              Eat pie and be like me :D
              • Jan 2002
              • 525
              #4
              I have a 12v revvy i will sell you for $25 + $8 shipping? i also have one with an x-board but shell cracked so it is in a regular shell i will sell for $30+ $8 shipping, let me know.
              Email: [email protected]
              MSN: [email protected]

              Stolen Impy!!!!
              Silver Logic Nasty Imp.SN: NA000613LP02

              help me find my marker and you recieve something that will help you majorly along your way!

              Good Traders: CiscoKid, Darkhelmet, DicksonDood23, Holyboy77

                Comment

                • Kevmaster
                  Owners Group Div: Director
                  • Oct 2001
                  • 5475
                  #5
                  all you need to convert a 9v revvie to a 12v revvie is
                  1) X-Board ($10 at most stores)
                  2) new Paddle ($4 at most stores)


                  hope that helps. The motor is identical on both

                    Comment

                    • Mr.Minus
                      Registered User
                      • Jan 2003
                      • 281
                      #6
                      yea but the shell isnt

                        Comment

                        • JT2002
                          Registered User
                          • Jun 2002
                          • 1863
                          #7
                          Originally posted by Mr.Minus
                          yea but the shell isnt
                          um with the BE revs the shells for the 9v and 12v are the same, except that the 9v revs come with a little plastic block so that you can only fit 1 9v battery in there. just remove the block when u got to but the x board and impeller in.

                          but, however, if you have an old PRE BE revvy (it will say something like vl2000 on the shell, then it can only fit 1 9v and you will need new shells. i used to have a pre BE revvy, they work great and last longer than BE revs, but the 9v shell is smaller.

                          so mr minus, to a certain point you are right

                            Comment

                            • FooTemps
                              HURRRR
                              • Sep 2001
                              • 6702
                              #8
                              Just fire in bursts and you should be alright. The warp has a stack of something like 18 balls so it should be safe to fire faster than the revy can feed for about 18 shots

                              .
                              		Good Traders:
                              Tunaman, K-villeplayer, Magman007, Mastersconi, Jon/xpm, Kenndogg

                              My feedback if you've dealt with me, leave some...

                              Fruitcat: it's what AO doesn't like.

                                Comment

                                • JT2002
                                  Registered User
                                  • Jun 2002
                                  • 1863
                                  #9
                                  Originally posted by FooTemps
                                  Just fire in bursts and you should be alright. The warp has a stack of something like 18 balls so it should be safe to fire faster than the revy can feed for about 18 shots
                                  well yes it will stack about 20 balls in ur feed tube but theres one prob, once you run out of teh 10 or less ball inside the wheel you will have to wait till more feed in until u can fire. if there are no balls in teh wheel then the ball sin teh tube cant move anywhere

                                    Comment

                                    Previous template Next
                                    Working...