Thanks J-Lyte
I was finally able to get that one downloaded.
Rick
I was finally able to get that one downloaded.
Rick
-
FSE-LX No-Rise, Halo B, TL63 Trigger, J&J EDGE Set
CHUFF CHUFF!
Great Trader's The Frymarker {Grip Gurl}, Timmy63, SteveD, SHartley, More to Come? -
Unfortunately, I don't have a cad program with which to open up the attached file, so I'm guessing that the warp slug is following the current existing trends for warp bodies.
My comment here is that I would like to see the warp feed port come off at a 90 degree angle and not angled downward as the current modules do.
The problem with the current angles is that folks are having to cut or melt their hoppers to deal with getting the hose in the right position to feed properly. If the feed was setup so that it fed from the bottom, it would allow people to setup their warps alot tighter without having to modify their loaders.
The attached drawing is overly simplified but illustrates what I'm getting at.
-Evil BobComment
-
nicad
I appreciate your trying to send that download to me, your E-Mail got through but the attachment did'nt come with it. But I was able too download it off of J-Lyte's link. But Thank's for the Help anyway! your a true Gentleman and a Paintballer.
Rick
FSE-LX No-Rise, Halo B, TL63 Trigger, J&J EDGE Set
CHUFF CHUFF!
Great Trader's The Frymarker {Grip Gurl}, Timmy63, SteveD, SHartley, More to Come?Comment
Comment