Alright. Ive pretty much sold myself on buying a TKO Powerfeed package. I just cant figure out what kind of drop forward to get. I dont know how to hook up the macroline from the package to the drop I want- http://www.paintballgear.net/031-7751.html Do I just unscrew the fitting and screw it onto the asa on the new drop or do I have to buy different fittings???? Also, do you have any other recommendations for a good drop forward for the TKO?
-
Just got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
Warp -
first, try to add a little more substance to your topic titles.
ok and macroline alls you need is a macroline fitting, you screw it into the hole on the side of your drop(the asa), then have another fitting on your valve. Get some macroline, stick it all the way into one of the fittings then pull out to seal it. repeat with other end.
also droppin some oil in the fitting before u connect the hose on is a good idea too. -
Buy macroline fittings. They swivel. Stick macroline in hole.
Warning: When you put oil into fitting, dryfire 20+ timesComment
-
oh you also want to shot a tank or 2 threw the gun to break it in
good buyers/traders: becercom tunaman pullman richie CoFFeY[NiTrO]
www.vaporworks.net the best bushy upgrades!
www.infowars.com learn the truth about the goverment.
My FeedbackComment
-
shoot a tank or 2 to break it in?
nonsense.Comment
-
personaly i like the kapp cradels, http://store6.yimg.com/I/actionvillage_1732_75849318
you can put the bottle any where u want. but ull have to get an asa for it, this is is good http://store6.yimg.com/I/actionvillage_1734_119531429 or you can just look around for an asaOMG OMG OMG SHAKOW!
CGNU-crazy go nuts university
TEN HEAD!!!
I want to try people meat
Comment
-
Guys, I know how to seal a macroline. And macroline comes with it, read my post closer. I asked if the macroline that came with it would work on the drop.Just got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
WarpComment
-
B00bzor thanks for readin the postJust got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
WarpComment
-
Sorry for gettin harsh. Ive had a long dayJust got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
WarpComment
-
CaptainFatCat, im 99% sure it wont clear your forgrip.
look into a Shocktech Med drop. or anything around its sizeRT
Ace'd Emag (sold)
Xmag (sold)Comment
-
Do you think the SX-10 Long drop would clear it?Just got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
WarpComment
-
UpJust got my mag, classic standard hopper right feed, hose, asa, and 10" All-American.
Soon to come:
Black ULE Body
Black System X drop w/ on-off
Dye Xcel
I-Frame or Z-grip(cant choose)
LvL 10
X-valve
WarpComment
-
Not nonsense at all. All of my Mag valves have been flakey till I cycled it a few hundred times. No need for paint, just shoot some air through.Originally posted by Skoad
shoot a tank or 2 to break it in?
nonsense.Comment
Comment