ATTN--ACE board owners!

[Dayspring]

I don't have that...

Originally posted by snakestang
That black cover should be attached to the board. The epoxy (goo) may not have set to the plastic and it came off. But, that cover should be over the ACE.

[Load SM5]

Just the goo pile here.

[fire1811]

we are all a bunch of goobers

[cphilip]

Mine looks like Snakestangs from the top up without me taking the body off to be sure under there. Has that black thimble looking cap on it and ends about where his does. I suspect mine looks exactly like his under the body but definately from there up they are exactly the same. My pictures are too fuzzy to show it.

Are you saying with the thing all assembled and you just taking the feed module off yours is not just a completely cylindrical plastic black thimble with a flat top? Mine is.

[cphilip]

This picture is horrible but maybe you can make out the black plastic cone...

[fire1811]

yes chphilip we have the cap on top but if you take your
grip off there rest of the ace is goooooiiiieee

[magman007]

yep, i deffinitely do not have the goo cover cap, i jkust got goo.... then again, i fried my ace as well! you all saw that thread, no need to dwell... but i will be replacing it! and i will demand a goo cover now! hehehe

[darklord]

Originally posted by ChuckWag78
I thought AGD dropped the ace idea after level 10 came out?

Whats the point now anyway, LVL10=NO CHOP
So why do you need the ACE

As others have said, overkill... it's just an extra assurance. I mean, why NOT have it? But also, in manual only the level 10 works. The ACE is extra assurance, plus with it on the board is capped around 20 or so bps, 4-6 more than the board with the ACE off, capable of 16....

[cphilip]

Originally posted by fire1811
yes chphilip we have the cap on top but if you take your
grip off there rest of the ace is goooooiiiieee

Yes fire but what you are missing is they seem to not have THE CAP! Er... I think... I not sure what they have since we still not seen it but I am thinking thats what they are talking about... part of the cap?

[Load SM5]

Phil, what they are talking about can't be seen unless you take the mainbody off of the frame. From the cap down apparently should have a plastic cone that covers the ACE stem. Some have it, and some have a pile of what looks like silicone surrounding the ACE stem.

[Dayspring]

Here's a pic of my Xmag first hand.

As you can see, it's UNDER the breech (which I should have said originally) but there is no plastic cover to the ACE wires.

[WonderPug]

I got no goo! I got no goo! La la la la la dee da, Ive got not Goo!


A little insanity from the mentally insane.


Pug

[Dayspring]

After some fiddling in chat with Datapimp's help, it turns out the little black shroud IN the breech is the same piece in question. It's notched and sticks in the body. It looks like it WAS glued but it doesn't stick.

That's what I get for thinking about my Xmag at work.

In any case, I think the mystery has been solved. HOWEVER, I don't care that they stick in the body and NOT on the board where they should be.

[JEDI]

Nick, just to confirm, I'm very gealous of your new toy. Thats they exact color I would chose. To tell you the truth I wouldn't care what color I had though. I'd even shoot Capo's mega girly gun. Its an X-mag. What ever. But good luck to you! If I was even slightly more insane, I'd slap some plastic down at PBX and buy the purple one. Damn!

That gun will forever be a thorn in my side!!

[Dayspring]

Originally posted by JEDI
Nick, just to confirm, I'm very gealous of your new toy. Thats they exact color I would chose. To tell you the truth I wouldn't care what color I had though. I'd even shoot Capo's mega girly gun. Its an X-mag. What ever. But good luck to you! If I was even slightly more insane, I'd slap some plastic down at PBX and buy the purple one. Damn!

That gun will forever be a thorn in my side!!