I think my original thoughts about this project came from looking at autocockers. I just decided that it would be really cool to have an air ram actuated electrically controlled mag. I used a Z-grip because it gave me the most room in the back to work with. All the componentsI used, I got from work. I started with a bafricated banner photoeye that looks for a bolt that I added to the back of the trigger. It opens an electric solenoid Mac valve which in turn sends low pressure air from a seperate reg. to the air ram. I needed at least 22-30volts DC to operate the electrics. I thought about a seperate battery pack, but couldn't find a good location. So I added a battery in series to the hopper. Giving me 27volts from the hopper but still allowing it to work normally.
-
-
sounds nice....when can we see it? -
I'll have some pics soon, but there are a couple in the Ultimate Madness thread.
I also just installed a lvl 10 and a warp feed(thanks Tom)Comment
-
-
It's different and interesting, not to mention an electronic Z-grip.Originally posted by IcantBelieveit
im confused...whats the point?Comment
-
For the lazy folks, here's a link
Nice work, very intruiging dude (however you spell that
)
Definately get some high quality pics of what's going on with that ram and your electronics, That thing is a bit too much for me to wrap my mind around this late
Comment
-
Like this?
She's been updated since with a nicer LPR, a chrome taso barrel and chrome body. The black stull is all getting anodized blue/silver acid wash.
basically a teeny tiny ram I built toggles the sear. It's controlled by a small timer curcuit, a Humphrey's 301 valve and a 9volt.Punisher's Customs
"Because the Dead-Box is a lonely place"
Comment
-
holy cow! Look at all the wires/tubes down there. I'd be afraid of yanking one of them off.
Is there any way you can tuck some of that away in a box or something?My Trader Feedback
It was the only tournament I've been to where they have more cases of beer than paint. - gimpComment
-
Punisher - For some reason I thought your design was run off of a mechanical cocker x-way? That's cool.
EZ-MAG - I'm guessing I'm using the same type of Mac valve you are. Unfortunately I'm trying to cram it into a stock frame. Having some issues getting the cylinder to fit correctly. I need to find a slightly lower profile microline fittingComment
-
looks like it has been assymilated by the Borg from Star Trek.Comment
-
-
all im sayin is WOW i looked at that rubbed my eyes pinched myself rubbed my eyes again and said wow 1 more time...im very confused w that z grip maxy electro thingy set upComment
-
Punisher,
I don't like your as much.It needs a little more Frankenstien at my Mag.
Jay.Logic Paintball Forums
My A O Feedback Here
Other Feedback Here
If I've Been Any help
Please Leave Some. :)
Comment
-
I seen this in the other thread the other day before it was explained and was like What the *ell is that. But i guess that explains it now.
Props to echo419 for the sigComment
Comment