Phantom questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DoctorStox
    Paintball Whore
    • Feb 2002
    • 1250

    #1

    Phantom questions

    hey guys, i am getting a vsc phantom and i have a few questions. my first question is does it have a site rail, or is there a site rail i can attach to it? also, are there any feed tube mods which will assist in helong me with the loading because it might take a while for me to get used to the way a horizontal tube loads. my last question is where can i get a stock class harness (to hold 10 round tubes and 12 g), where are the cheapest 12g cylinders (in bulk, like 50 i guess, maybe more, i dunno) and where can i buy a cheap 3.5/4 oz tank. thanks guys.
    far from handsome, but damn a whiteboy toke
  • -=Squid=-

    #2
    Ill answer your questions if you buy my urban cammo 45 frame phantom

    Comment

    • Paintballer86
      Proud E-Mag User
      • May 2001
      • 1000

      #3
      ok.
      Yes, the phantom does have a stock sight rail. It is located on top of the black (Or clear) part that connects the feed tube to the body.

      Yes. if you are not playing stock class (just some backyard ball), I would HIGHLY suggest a hopper fed body. Becuase filling it up every 10 balls is quite annoying.

      You can but 10 ball feed tubes with caps at 888 paintball for like 80 cents a peice.

      I use a Unique Pro gear harness (I think thats what it is called) It cost about $60 and it is very high quality and is great.

      I am not sure if you can buy 12g over the net, b/c I dont think you can ship compressed gas. But I am not sure.

      Look on www.888paintball.com for a 4 ounce co2 tank. I got an email a few weeks ago for one on sale for $12 or so. I am not sure if it was from 888 paintball though.

      Hope this helped!
      Dave

      Comment

      • DoctorStox
        Paintball Whore
        • Feb 2002
        • 1250

        #4
        i know about the stock little v groove. but i wanted to know if there was a rail so i can put on an actual sight. maybe a scope or a red dot.also, i went the on phantomonline and they had the detent rings, how do those work? also, is CCI the only place i can get a stock for my phantom, their stokcs are quite pricy. lmk.
        far from handsome, but damn a whiteboy toke

        Comment

        • Paintballer86
          Proud E-Mag User
          • May 2001
          • 1000

          #5
          Yes on the stock v-groove you can mount a scope. ( i beleve it is 3/8 inch dovetail)
          the detent rings are like a ball detent.... in ring form. what you do it size the ball with the ring, and than drop the ring in the breech before you screw in the barrel and it gets squeesed in between the barrel and body.

          You could put any stock on the phantom, anything that will mount on a 2 screw hole adaptor like on the bottom of the grip. I think 888 has somehting called an "L stock"

          Comment

          Working...