Am I about to get ripped off?

[WARPED1]

Just my opinion, if ya like cockers, by all means, use it!(when you're not in the staging area fixing it).

[Cryer]

I think $500 is a good deal...Of course the more you can talk it down, the better of a deal it is, but if you took it for 500, you'd be alright.

[WARPED1]

Try $350.

[theraidenproject]

Originally posted by FreshmanBob
Oh yeah, thats most definately a stock reg, just with a grip thing on it. See how the line goes in on the side?

My friend actually has the stock reg with the cover, and it is different. First, the input of the stock reg is on the bottom. Also, his cover has four finger grooves. That looks like an Ergo to me.
Oh yea, I'd pay low $400s for it, but that's just me. Take that with a grain of salt, though, because I don't really know much about cockers.

[RusskiX]

It IS an ERGO inline reg.

Chromed sledgehammer front reg...not externally adjustable
Can't tell about the 3 way, but bombs are nice.
Chrome clippard ram...nothing special, but nicer than brass.
DYE slider frame...a very nice slider with trigger stops, but its no hinge
Looks like the stock bolt...there are better out there.
9V revy...what no 12V?
Flatline 3000psi...nuff said

If I was selling it, I'd ask for $500 to start, but I'd be prepared to settle for less. Try to talk him down to $400.

[thecavemankevin]

dude, try like 350 if it is used and the tank is out of hydro and a 9v is pretty much worthless.

You could pick up a brand new 03 with hinge for right around 300, then pick up a used (in hydro tank) for 100-150 and your still coming out ahead. It is good that it has a bomb three way, but that certainly doesn't make it worth getting that for that price. Sorry, basically stock cockers and stock mags have really low resale price due to the fack that they are a dime a dozen! Tell him no way and that he would get more if he pieced it out.

[NJPaint]

wow, you guys are great, thanks a lot! And about the mag vs cocker... I own a mag, just want to try something new :)

[askman]

if the tank is in hydro, it is worth 150-175. figure 25 bucks to hydro.

stock 2k3 cockers are close to 350. The one you have is slightly better than stock. (frankly, good slide frame is worth as much as wgp swing trigger frame) but it is used. so 350 is fair value (looks like pneumatics are black magic level. good usable stuff)

9v revvy is worth 20-25bucks.

so, 450 is fair deal, 400 great deal. 500 is top dollar.

[FeuerFri]

450 would be a decent price on it. the dye slider is sapposed ta be one of the best sliders, and the ergo regs are nice. maybe get a henge later to take full advantage of the bomb, grab a freeflow internal kit, it comes with Free flow valve, hammer, bolt, and springs, and is only like, 99bucks, which is definatly a good deal. goto www.4freeflow.com to look at the stuff.

[irbodden]

Go to PBN and see what used 'Cockers are selling for, basically nothing....

I'd pay $400 for that setup, tops.

[Cliffio]

i dunno if someone asked this alread, but it looks like a stock body, whats so custom about it?

[FutureMagOwner]

that definantly isnt the stock bolt see how its ribbed on the back? and its got the sight rail milled out thats all i can tell from the picture

[Jtpaintball17]

thats pretty nice, but i'd only buy it for no more than $450.

my friend is sellin his fully loaded blackmagic cocker for around $650.

i dont know all of the specs on it but if you or anyone else is interest you can e-mail me at [email protected] and my aol instant messenger screen name is jtpaintball17. i will get all of the specs for ya. let me know asap cuz he's tryin to get rid of it to get an angel. its like a brand new gun.. he got it over x-mas time.. but he likes to buy a stock gun trick it out and then sell it and buy a newer and better gun .. he went from 68 mag classic to a cocker now onto the angel...

[BajaBoy]

Originally posted by Jtpaintball17
thats pretty nice, but i'd only buy it for no more than $450.

my friend is sellin his fully loaded blackmagic cocker for around $650.

i dont know all of the specs on it but if you or anyone else is interest you can e-mail me at [email protected] and my aol instant messenger screen name is jtpaintball17. i will get all of the specs for ya. let me know asap cuz he's tryin to get rid of it to get an angel. its like a brand new gun.. he got it over x-mas time.. but he likes to buy a stock gun trick it out and then sell it and buy a newer and better gun .. he went from 68 mag classic to a cocker now onto the angel...

lol man im always correcting you and i feal bad, its a 2k3 not blackmagic

[AzrealDarkmoonZ]

Myself, I would offer 400. Really the resale on cockers is horrendous today, and if you have either a RF or slider you are pretty much out of luck. Unfortunatly that one has a slider and therefore its resale drops even farther.

For around 300 I can get a comparable cocker with a hinge, and Flatlines resale is about 150 - 25 or so for the hydro. It has a black Ergo Regulator, which is not to bad of a regulator. The 9v revvy is only a hair better than a VL200. The milling is not radical enough to make it stand out, but really all I can see is the milled sightrail. The bolt actually reminds me of the older odd freeflow bolts. Is it a 2k+ model? From the backblock it appears to be but the best way to tell is if the banjo bolt is the larger version. IF it is a 99 then the sale value just dropped some more.

If you do get it drop over at www.air-powered.com, and say hello, of course at this moment the boards are sorta screwy but that should be fixed by end of day.

Az