Angry Grrr

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ShaftyMcGee
    SHAZBOT
    • Feb 2003
    • 380
    #1

    Angry Grrr

    i just got my micromag and boy was i happy, till i relized that there wasnt a bottom line on the gun like the guy i bought it from said there would be, then i relized the serial numbers on the valve dont match either, the guy i bought it from said they did, because it didnt have a bottom line i had to go out and buy one leaving me short on cash for the nitro tank i was gonna buy, so im forced to use co2, i tried the gun out and it leaks down the barrel,i guess what im trying to say is...
    why does god hate me?
    VIVA LA TOM
    Tags: None
    • Teen
      -Mag Master-
      • Oct 2002
      • 159
      #2
      did u get it off someone on ebay?

      god don't hate you, the bad things that happen is what makes the good things that happen even better . once you get your marker fixed you'll probably love it. if you get it fixed
      MY MAG:
      -SS P/F right body
      -Nickel Intelliframe
      -NW nickel drop forward w/quick disconnect and on/off
      -Nickel CP mini forgrip
      -X-valve
      -Lv X
      -SP blue splash kit with matching AA barrel.

        Comment

        • WickeDKlowN
          Registered User
          • Jun 2001
          • 3098
          #3
          just get a PT spacer kit, and dont worry, CO2 isnt going to butt rape your gun or anything(unless you let liquid in, or its an RT) It will work fine.
          Classic RT - RT02667
          Blade IntelliFrame
          Dye Ultralight

          http://TheHybrid.net/

            Comment

            • ShaftyMcGee
              SHAZBOT
              • Feb 2003
              • 380
              #4
              this is why i love this forum everyones so nice, ok so whos gonna help me fix my gun? its leaking down the barrel, which is from what i heard a common problem. oh btw i got the gun off the pbreview forum
              VIVA LA TOM

                Comment

                • darklord
                  missing my matrix
                  • May 2002
                  • 2105
                  #5
                  unmatched serial #? That sucks!!! If I were you, I'd see if you can't get it fixed ASAP. PM BlackVCG, I know he gets a LOT of guns to work on, but he is THE MAN when it comes to automag-related gun fixing. I sent it to him and he fixed my e-mag perfectly, so I'm sure he can get your micro working. Hope all goes well! Nothin spoils your mood like a broken gun

                  Good Traders: SupaTravis, Joeyjoe367, biker, Zenwood, arabian ape, beefstew, timmy63, ah137, kilaueakid, Will Wood, Remington, DicksonDood23, CPhilip, Fritzy, Dirtybunny, LittlePaintballBoy, JadedT, ChucktheMAGician, TheFlamingKoosh, lgavin
                  My Feedback Thread
                  Out of the sport... missing it.

                    Comment

                    • Duke Henry
                      Team SYNDICATE
                      • Jun 2002
                      • 542
                      #6
                      I assume after receiving the gun you took it down and oiled it up? If not, give it a good lubrication. From the sound of it, I doubt the previous owner took care of it.
                      TEAM SYNDICATE

                      My Ebay Feedback

                        Comment

                        • ShaftyMcGee
                          SHAZBOT
                          • Feb 2003
                          • 380
                          #7
                          yeah when i found out the #'s didnt match i was pissed, i was talking the the guy i bought the gun off on instant messanger and i specificly asked him to see if the numbers matched and he said they did, talk about a cold hearted SOB,
                          i was looking forward to getting an X-valve when i could afford it to

                          i lubbed it up real good when i first got it, looked a little dirty so i cleaned it up real good, i dont know a lot about mags but i think i can figure it out.
                          any one know a good place to get parts kits for cheap?
                          VIVA LA TOM

                            Comment

                            • NiteWolf1138
                              Mag-lomaniacal Wolf
                              • Jan 2003
                              • 148
                              #8
                              Originally posted by ShaftyMcGee
                              any one know a good place to get parts kits for cheap?
                              If you can't find the parts kits and such at a local field try the AGD Store. My advice is to get two parts kits for the valve you have(and two for the XValve when you get it) as well as the spacer kit.

                              I dragged my Mag outta storage and it leaked everywhere even after oiling it extensivly. After a parts kit I still had down the barrel leaks and had to get a spacer kit.

                              I then took my resurected Mag to the Dallas AO Meet and didn't have a problem.

                              Edit: If you didn't get the owner's video with the Mag I'd suggest getting one. Tom does a good job of explaining how to fix and troubleshoot the AutoMag. Just make sure you get the video that matches you marker.
                              NiteWolf1138

                                Comment

                                • J Murder
                                  #9
                                  why on earth would the serial numbers not match? What kind of A$$-clown would switch the valve halves?

                                  at least you got a gun! it could have been much worse

                                    Comment

                                    Previous template Next
                                    Working...