Hey does anybody know a good store to buy teflon tape? I went to my local Walgreens and they didn't seem to have any.
-
I spent a saturday over a year ago with a group of people doing some trajectory testing with a bench mounted Mag and Cocker with identical barrels (Armson Stealths and PMI Ceramics), chronoing every shot over a red radar chrono. Had a big particle board target with a 2" grid mounted to a ladder that we would move to varying distances.
We discovered 2 things:
1) Cockers will break if you look at them wrong.
2) There was absolutely no discernable difference in the trajectories of the two guns. -
walmart - plumbing sectionStatik Seven Labs' Machinist - We are the industrial revolution.
Good Buyers/sellers: Adio755, Jon/xpm, Carpecerevisi, Torbo
My Feedback -
Any hardware store or anywhere that sells sprinkler parts.
Home depot, Lowes, even nurseries.
TomComment
-
hardware stores
good buyers/traders: becercom tunaman pullman richie CoFFeY[NiTrO]
www.vaporworks.net the best bushy upgrades!
www.infowars.com learn the truth about the goverment.
My FeedbackComment
-
Any halfway decent hardware store will sell teflon tape. It's like $.89Good Traders/Dealers: Ken Kaniff, HawPunch, RougeFactor.
Comment
-
hardware store... oh wait, did someone say that yet?Great Traders - DiRTyBuNNy - midwikid - than205 - DropKick1 - jericoholics - personman - Siayajin - Remington - Jaymz
My Feedback
My For Sale and Wanted ThreadComment
-
Make sure the little container says "sealant" or "seal" on it, instead of "Anti-seize".
Comment
-
Look for the yellow stuff made for gas fittings. It's thicker and less prone to breaking up and shooting bits into yout valve/tank.Comment
-
cause that's what popcorn is forOriginally posted by Load SM5
Look for the yellow stuff made for gas fittings. It's thicker and less prone to breaking up and shooting bits into yout valve/tank.You are the Wormtongue of AO.~bofh
Comment
-
Exactly......Comment
-
Thanks guys. I guess I'll be going to the hardware store.I spent a saturday over a year ago with a group of people doing some trajectory testing with a bench mounted Mag and Cocker with identical barrels (Armson Stealths and PMI Ceramics), chronoing every shot over a red radar chrono. Had a big particle board target with a 2" grid mounted to a ladder that we would move to varying distances.
We discovered 2 things:
1) Cockers will break if you look at them wrong.
2) There was absolutely no discernable difference in the trajectories of the two guns.Comment
-
Acctually...you don't want the yellow stuff. Oddly enough, it's thicker, but it is also for LP uses. You want the HP 2000-3000psi rating that is white tape in a blue roll.
Comment
Comment