Pumpmag - Going from pump to semi?

[pbguy888]

I was wondering how hard it is to switch around? And about how long it takes? Thanks

[cledford]

I'd say about 15 minutes tops.

Disassemble marker
remove pump assy
remove wavy spring and bumper
replace with correct bumper
reassemble.

I think that's it.

-Calvin

[�.C.]

I'm pretty sure all you gotta do is pop out the valve and remove the pump bumper. I'm not positive though, I still need to get my pump rod before I can try anything out

[askman]

you can play with pump handle in place. take the spring out and replace it with bumber is all it needs. best to lock the pump handle in place though, so it does not move back. (so the rod does not get banged up)

[Muzikman]

The pump kit was designed to be able to unbolt the pump handle from the front and leave the handle mount on the gun. What will come off is the handle and pump rod. You then need to take the valve out and remove the wave spring and bumper and put the blue bumper back. You also may want to replace the PT spacer as the one needed for the pump kit is really short (but it will still work in semi mode).