Velocity problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bryceeden
    www.vernalpaintball.com
    • Dec 2002
    • 1076

    #1

    Velocity problem

    First I run CO2, I can't fill HPA in my area so I don't have that choice. Yesterday was the first time I have played in warm weather and my marker kept supercharging, I turned the velocity down and the only effect was a 572FPS shot and then the marker wouldn't function untill I turned it up more. It was only 70 degrees out there and during the summer it frequently gets above 100 so I am really worried. Anyone have any ideas on how to fix the problem?
  • -Carnifex-
    Registered User
    • Jan 2003
    • 1434

    #2
    Uhhhh, I wasn't aware that heat affected CO2, just cold. Probably wrong. Try buying a new tank if I'm right though.
    "What we have to accomplish at this time is all the more clear: relentless criticism of all existing conditions, relentless in the sense that the criticism is not afraid of its findings and just as little afraid of the conflict with the powers that be."
    - Karl Marx

    Comment

    • shartley
      paintball player
      • Mar 2001
      • 9169

      #3
      Do you have a good expansion chamber? This allows the CO2 to become more uniform in temperature and will help your consistency.

      Yes, heat as well as cold affects CO2 setups. It is quite common to have to crono several times a day if the temperature warms up a great deal from the morning crono temps. I always advise at least once in the morning, once at noon, and then if you play into the evening go ahead and check it again. And try not to leave your marker out in the direct sunlight. (Note: Sometimes you even have to swap springs to bring the velocity down so keep a spring kit handy.)

      With that said, it sounds like you have a bad setup. With shooting hot because of outside temperatures, it should affect ALL your shots. I would bring it to a shop and have them look it over.

      www.ShartleyCustoms.com
      Custom Paintball Products and Accessories
      CLICK HERE to Check out our PDU SERIES GEAR!


      its more like a paper cut that has primadonna's yelling murder... - Glickman

      Comment

      • TheFlamingKoosh
        I'm No Longer On Fire
        • Mar 2002
        • 1710

        #4
        Re: Velocity problem

        Originally posted by bryceeden
        First I run CO2, I can't fill HPA in my area so I don't have that choice. Yesterday was the first time I have played in warm weather and my marker kept supercharging, I turned the velocity down and the only effect was a 572FPS shot and then the marker wouldn't function untill I turned it up more. It was only 70 degrees out there and during the summer it frequently gets above 100 so I am really worried. Anyone have any ideas on how to fix the problem?
        It might help if you tell us what kind of gun you have first, and any mods to it
        Hey Zero, how much did that Chipley cost ya?

        Originally said by Boggerman When I got married I thought it would go down too... The insurance, not the wife.

        FRUITCAT!!

        Comment

        • bryceeden
          www.vernalpaintball.com
          • Dec 2002
          • 1076

          #5
          It is an automag classic. The only mod that would affect the valve is a shocktech charger.

          Comment

          Working...