Paintchucker's Paintguns...

[Paintchucker]

First Semi...

Antique Custom F2.5 Illustrator...

This is a custom F2 Illustrator SN# F201028:
add-on rear cocking bolt
custom powerfeed (professionally done)
smart parts wooden grip
bottomline hose and ASA adapter
smart parts wooden foregrip
brass trigger shoe
expired 12oz antisiphon C02 tank
site rail
adco red dot site
Indian Springs Maxi Loader
Original Barrel with rubber foregrip
6" Armson barrel
10" Armson barrel
16" Black Smart Parts AA
16" Red Smart Parts AA with plastic foregrip
spare parts kit with springs

[darklord]

um all I have to say is, wtf is up with the ULE and halo b on the retromag, but not on the e-mag.... I'd think it'd be the opposite.

[Jonno06]

niiiiice guns man..really makes me jealous:o

[Paintchucker]

Originally posted by darklord
um all I have to say is, wtf is up with the ULE and halo b on the retromag, but not on the e-mag.... I'd think it'd be the opposite.

That is the coolest things about these mags... All the parts are mostly interchangable between the guns. I can have the ULE body on the EMAG in about 5 minutes.



The parts on the above gun have been spread out to a couple guns now.

How often have you seen a Minibody on an EMAG???

Other than this one, I have only seen two others. It takes a couple hours with a dremel tool to get the minimag body's square peg to fit in the round hole on the Emag's body rail...

ChucktheMAGician's Emag:



Heat's Blue Flame:

[Paintchucker]

Early ULE version

Thread wouldn't be complete without my "fantasy" Emag.





With a little tinkering, it flies in MS Combat Flight Simulator 2. Never did go far enough to make rockets that looked like paintballs, but could have. ROFLMAO...



& Here is an earlier version of the ULE...

[ChucktheMAGician]

I was gonna comment on the mini E but I see that you've seen mine already Looks great, and are there only 3 of us?!

[Paintchucker]

Most'est Beautiful Revy on AO !!!

[FooTemps]

how'd you get the fade to come out so well!?!?

[RenagadeOfFunk]

congrates...now im sad...

[AngelBoy]

Nice guns. Nice fade on the revvy also, looks beautiful.

[jimmyjobob]

.

.

[Paintchucker]

And then there were 4 ...

Looks great JimmyJoBob !!!! I was wondering if you were going to do it.

FooTemps: The way I got this to look like it does is by:

Taking all the parts out of it, and screwing it back together, then taping up the seams on the outside.

I used a $3 bottle of Rit Dye in Royal Blue, and mixed it up very concentrated. Then I put the Hopper with the front side down into a pot, and then poured the dye into the hopper's insides. Every couple of minutes, I would swish the dye around on the inside. That way it is very dark at the front end, and fades nicely towards the back.

It takes a little longer than just dumping the whole hopper into a large pot of boiling dye, but the results are well worth it !!!

[Tyril]

How often have you seen a Minibody on an EMAG???

I've got one!

*w00t*


but I prefer my phantom anyways =)


-mike

[Prezents]

Nice

Very nice looking Collection!!!!