Regulator or Expantion Chamber?

[tmouffe]

Hey, I am currently about to buy a minimag, but where I live there is absolutley no access to Nitro or Compressed Air so I will be running Co2. A friend of mine and I are currently in a debate on which I should get, an expantion chamber or a regulator?

What do you think? and what kind?

Thank you for your help, it will really help in my decision.

[rhcp377]

minimag comes with a built in regulator in the valve
but its not very good with co2 so if u use co2 use a remote or anti siphon tank

[Muzikman]

I would get a Palmer Stabilizer and an anti-siphon tank.

[ugabiged88]

Definetely buy the Palmers Stabilizer and get an antisiphon co2 tank. It will cost you more to do this but your gun will perform a lot better.

[rehme]

palmers will keep just about all of the liquid co2 out of the gun

[ugabiged88]

Yeah, the Palmers will keep liquid out of your gun and make your gun a little bit more consistant.

Get the Palmers Stabilizer, now!

[madmatt151]

Both...

I used an expansion chamber into a palmer sideline reg and I never had one problem. As an added security Ialso ran remote. If you are going on gun tank, get anti siphon. I might build another mag to use co2 just because I have all these parts lying around and I go to trips and play on fields with no nitro either. Where do you live that there is no nitro fills?

[WickeDKlowN]

If you have the cash, get a Palmer Stabilizer. Great CO2 Regulators. They have one made for mags that screw directly into the valve too.

[dropkick1]

as everyones said, get a palmer stabilizer, and to make it easier get teh side-line set up so it goes into your valve, and if u really want put an x-chamber as a foregrip and get an anti-siphon tank and you'll be set.

ken