Custom Built or RT Pro?

[Mrmacdude]

Which is bettert-

RT Pro, 600
one question there, will it come with Retro, and no LX or an X valve? if it has LX, do i need to tune it?

OR

ULE or NO-RISE Body- 150
Intelliframe-110
Foregrip-20
X-Valve-300

Do i need a sear assembly too?
How bout anything else i missed?
Will a no-rise feed at a decent rate with a 12vlt? or do i need a halo?




i leave the drop and barrel out cause they would cost the same for each setup.

Which is better and which is cheaper?

[Mrmacdude]

or a tunamag built to the same or similar specs.

[jaylock33]

I'ld go custom and don't forget the rail.

[athomas]

An RT pro comes ready to go but is a generic gun in AGD terms. It is as good as most top end guns though.

If you plan on buying a new barrel (which most do anyway) and/or a new ULE body, then you are probably better off getting the parts and building your own to spec.

I use a 12v revy on my emag with a ULE body and it works fine. I am going to an Egg II very soon, but the revy keeps up most of the time and the level 10 prevents any mistakes the other times.

[Mrmacdude]

if i buy all custom parts, do i need a sear assembly?

[Mrmacdude]

can i use sticky 3s on an intelliframe?
Where can i buy a rail? i dont see em at the AGD store.
i know what they are

[circus5]

answers

you'll need a sear assembly, rail bushings, and uh... something else.
sticky 3s should fit an inteliframe if they are anything like sticky 2s (which are on my intelli now). As for the rail, if you don't see it in the store call up AGD.

[Mrmacdude]

whats a rail bushing?

[ugabiged88]

Just buy the older stickies. I have heard from many people here that the new stickes break very easily on intelliframes.

[Mrmacdude]

ok.

anyone have a COMPLETE list of parts i would need for a mag i could build myself?

also, whats the prices on tunamags.
Like parts+how much?

[jaylock33]

Built my latest mag custom and this is what it has and what I had to buy:

*ULE Body
*Intelliframe
+Automag Rail(included rail bushing)
*X-Valve (included sear and full Lvl X kit)
+Fieldstrip screw
+Front Frame Screw
+Verticle Adaptor (allows for addition of for grip)

Parts with a + in front of them can be found under parts section in agd store and the parts with * in front of them can be found under the upgrade section. You'll also need a drop and cradle to attach the tank to you system. I believe this is everything if someone thinks of something I forgot please include. I hope this helps.

[athomas]

Regular mag rail: http://store.airgun.com/acb/showdetl...ID=236&CATID=6

RT pro rail: http://store.airgun.com/acb/showdetl...ID=307&CATID=6

ULE rail: http://store.airgun.com/acb/showdetl...ID=324&CATID=6


Parts list:

1) X-valve - comes with level 10 bolt and sear assembly. Choose sear assembly to fit the rail you buy.
2) Rail
3) sear pin (choose to fit rail you are using)
4) Rail bushing (Oops comes installed)
5) intelliframe
6) ULE body
7) rear field strip screw
8) front frame screw
9) vertical bottle adapter c/w gas through grip assembly
10) drop down to hold air bottle under gun
11) Compressed air bottle
12) ASA with on/off assembly (may be integrated into bottle if the bottle is an adjustable type)
13) air lines and connectors to suite your air assembly placement and look.
14) quick disconnect for easy removal of the X-vavle for cleaning and lubrication
15) barrel assembly (your choice) cocker threads
16) good loader (Halo, Egg II, revy will work for most people)

If I left anything out put it in a subsequent post.

Hope this helps

[AlabamaMan]

Originally posted by Mrmacdude
whats a rail bushing?

ask thordic he'll tell you

[jaylock33]

Here's the rail bushing.

[Mrmacdude]

aww.... i cant afford a rail bushing.

I decided that i dont have enough money to buy a custom outright.... more than i thought needed to go into it. I decided to turn my mag into my dream mag. I just bought a blue ULE!!!! next, a freak, or boomy. Then, intelli. Then X-valve.... then i have accomplished my goal. i might need a cooler rail.. we'll see.

Do i need to tune the LX on an X-Valve?