upgrade installation

[Mrmacdude]

How hard is it to install Level 10 and an intelli?

Im NOT mechanicalluy inclined or intuitive.

[BajaBoy]

very easy man.. just takes a little bit to get it fine tunned.

[Mrmacdude]

what do i hafta do to tune it?

[USAF-Flyboy with a Mag]

Once you understand how the level X works, tuning is a snap. Basically you will be switching between carriers and springs until you find the correct balance that doesn't cause a leak and isn't too hard on paint.

[Xyxyll]

http://www.automags.org/resource/level10/index.shtml

[Mrmacdude]

if i got an xvalve, would i hafta tune the LX on that?

[USAF-Flyboy with a Mag]

yes you still need to tune it

[mrkbik]

It is not hard to install the actual intelliframe, all it takes is removing your old trigger frame and putting the intelli on. It is, however, kind of time consuming to set up the intellifeed.

[ugabiged88]

Level 10- just takes some tweaking and should be easy.

Intelliframe- unscrew old trigger frame and put it on.

Should be very easy to install these