Well this is an update on my gun, i just got a new gas thru, and a black 12" tearderop(thanks B.C)ordering my lvl 10 on monday.
-
another -
the gun is leaking from right here. Any idea's on how to fix it?Comment
-
-
If the gun is leaking out the back it's usually :
1-velocity is too high
2-Reg piston oring is shot.
3-Reg piston is of the old style and shot.
4-Reg seat needs replacing.Comment
-
ok.But its a ans phase 2 air valve. will that make a difference. becuse ill order the reg piston when i oreder my lvl 10.Comment
-
-
no, i dont, when i got it from somone it came with it. does it make a differece?ill ask him if he stll has the original.Comment
-
First try turning down the velocity, then replace the reg seat. If neither of these helps, then remove the reg piston and replace the o-ring on it and clean the reg up and re-oil it. There is nothing wrong with the ANS Phase II valve, it just is not any better than the stock valve and not worth buying one. However, since your mag came with one (as my first mag did), it is fine, just that no stars=no warranty
. It is possible that the reg piston is shot, but I would try cleaning, oiling, and o-ring/seat replacement first. Good Luck.
Comment
-
Comment