AGD...What Is The Status On The Warp ULE Bodies????

[AGD]

You have to take off about an 1/8th inch off the rail. AND YES WE DID MAKE THE FEED TUBE COME STRAIGHT OUT THE SIDE AND IT STILL NEEDS TO HAVE THE RAIL NOTCHED.

AGD

[RoadDawg]

Hacking a rail is no biggy to me. I've been crying since I couldn't get the warp on my other ULE. How soon til they are in the store?

[personman]

I saw one at DDay.. it was pretty nice!!
Too bad I dont use a warp!

[edweird]

/warms up the Credit Card and the Dremel....


Muhahahaha!

[nippinout]

Hrm...

Slot cut or try to do a radius. Or put away the Dremel and get a proper machinist to do it. heheheheh.

Is there any real difference between the horizontal and angled warp neck? Just a difference in geometry so it can retrofit more easily without eating too much rail?

[IcantBelieveit]

why are you guys crying about having to take a little metal off of your rails? I mean it is not that big of a deal is it? Once the body is on you wont see it in most cases. All you have to do is take a rounded file and file a little at a time unil you reach the desired affect. I mean, if having to file the rail a little bit is making you sell your mag, then you have some seriuos growing up to do.

[Clockwork_Orange]

I'm down for cutting my Omega rail, but are there plans to produce a rail specifically for the ULE warp? Does anybody know if they have a warp version of the cord body???

[Duke Henry]

Apparently PBX (Paintballistix) was working on a warp rail/body duo but I haven't heard anything on the subject from them in weeks...

Honestly, I could hack up my rail to get the warp ule body going, but for now I think I will wait and see what other body/rails are made in the near future.

[Jack & Coke]

Will there be warp "right" ULE bodies for us lefties?

[Duke Henry]

Originally posted by Jack & Coke
Will there be warp "right" ULE bodies for us lefties?

No, since that would only encourage more lefties to play.

[WARPED1]

Originally posted by IcantBelieveit
why are you guys crying about having to take a little metal off of your rails? I mean it is not that big of a deal is it? Once the body is on you wont see it in most cases. All you have to do is take a rounded file and file a little at a time unil you reach the desired affect. I mean, if having to file the rail a little bit is making you sell your mag, then you have some seriuos growing up to do.

It is a big deal for us nonmachinists, I wouldn't get a dremmel within 1000 yards of my gun. Also, who wants to wait longer to send the rail out, have it done, wait to get it back. We've already waited 19 bazillion friggin years for the thing to come in stock! And, it's not even here yet!
Also, tight budgets are another thing. I'm not going to shell out more money so someone can hack my rail.
On another subject, my Emag is in "Markers" looking for an Angel Speed or nice Shocker.

[Clockwork_Orange]

Originally posted by WARPED1
It is a big deal for us nonmachinists, I wouldn't get a dremmel within 1000 yards of my gun. Also, who wants to wait longer to send the rail out, have it done, wait to get it back. We've already waited 19 bazillion friggin years for the thing to come in stock! And, it's not even here yet! Also, tight budgets are another thing. I'm not going to shell out more money so someone can hack my rail.

The man does have a point!



Upgrade your grey matter 'cause 1 day it may matter!!!

[vf-xx]

You know it's this kind of stuff that can be really destructive to Tom's posting what he's developing. I mean I understand being in a hurry to get what you want, but be real guys. Things take time in any industry. And sometimes one product takes priority over another product.

Tell you what Warped1. I'm studying Mechanical Engineering and I have access to a full machine shop. If you want a warp ULE send me the body and the rail and I'll mill your rail for FREE just cover the basic shipping charges.

Personally I like hearing about things early, it give me time to plan it out and the like (as it also happens I'm broke right now so I'm not buying anything either but still....).

Honestly I'll honor that free offer to anyone else who's wants me to mod their rail. Mind you I'm not Nicad, I don't do this professionally.

[WARPED1]

My point vf-xx, is, I DON'T WANT TO CUT MY DAMN RAIL! I LIKE IT THE WAY IT IS!

[BajaBoy]

Originally posted by WARPED1
My point vf-xx, is, I DON'T WANT TO CUT MY DAMN RAIL! I LIKE IT THE WAY IT IS!

dude, if it is that big of a deal then DONT buy it, its not like agd is making it Just for you. Use a SS warp body or a normal ule.