Help me Decide!

[pbcustom98]

Mag

Originally posted by darklord
I see absolutely no need for a halo on a mechanical marker... if you're having real problems with your rico ont keeping up, get an egg II. Get a ULE body, a non-steel tank, and a barrel kit of some kind. After that if you still want to spend money, I'm sure you'll want a better marker

Even though its a mech marker, I got x-valve and Ive heard some ppl have had problems with an eggo..so im going halo. Right now im planning on Blue Stickys, Blue Ule, 68/45k screw in (dunno yet), Blue Halo, Barrel Kit.

Thanks
Daniel

[Bad A$$ Frontman]

Barrel

thats a nice set up, but im lookin and ur missin one of the key insturments in an excellent gun. I would deffinatly get the freak system, aa, boomy, or ultra for that. hey, shout me if yall think im wrong. alwayz open for suggestions.

[pbcustom98]

Re: Barrel

Originally posted by Bad A$$ Frontman
thats a nice set up, but im lookin and ur missin one of the key insturments in an excellent gun. I would deffinatly get the freak system, aa, boomy, or ultra for that. hey, shout me if yall think im wrong. alwayz open for suggestions.

Well right now my barrel fits my fields paint fine, so a barrel kit is last on my list. Welcome to AO, and Enjoy your stay!

Daniel

[JadedT]

Omega

Just in case you wanted a black Omega rail, I have one on its way to me. Could trade you it for your Chrome one. In NYC myself and we could just hand off if you are interested, let me know.

Good luck maxing out THE look for your mag. Here is my fiance's setup... Chrome and blue. Mine is all black. Maybe you ought to keep the chrome for a similar look to hers which now has an Xvalve on it, too.

[pbcustom98]

JadedT

Yea I'm interested. Where do you play? Lets set something up..try for a sunday (i work every saturday )..do you play at cousins in hauppage or coram? If not let me know where. If we cant meet..ill sent it to ya lol.

Daniel

[pbcustom98]

03 Stickies

How are they holding up on that I-Frame?

Daniel

[WickeDKlowN]

That wouldnt happen to be my old body and barrel would it?

Hope you like them.

[darklord]

Re: Mag

Originally posted by pbcustom98


Even though its a mech marker, I got x-valve and Ive heard some ppl have had problems with an eggo..so im going halo. Right now im planning on Blue Stickys, Blue Ule, 68/45k screw in (dunno yet), Blue Halo, Barrel Kit.

Thanks
Daniel

Uh, even with the bounce from the retro action x-valve, I highly doubt you can shoot over 10-12 bps.... plus there is absolutely nothing wrong with Egg II's...my friend has one on his autococker. No doubts about it, the HALO is the fastest loader available. But do you really need the fastest loader on the not-quite-the-fastest marker? I'm just trying to save you money, bro. Although if you ever decide to move on from the mag to a better marker, the HALO would probably come in handy...

[pbcustom98]

Re: Re: Mag

Originally posted by darklord
Uh, even with the bounce from the retro action x-valve, I highly doubt you can shoot over 10-12 bps.... plus there is absolutely nothing wrong with Egg II's...my friend has one on his autococker. No doubts about it, the HALO is the fastest loader available. But do you really need the fastest loader on the not-quite-the-fastest marker? I'm just trying to save you money, bro. Although if you ever decide to move on from the mag to a better marker, the HALO would probably come in handy...

Even if i went with an Eggo...do they have them in blue..the bling bling factor is one of the most important factors So I need Blue/Black. IF they do, then Ill see which one goes better.

Daniel

[darklord]

Re: Re: Re: Mag

Originally posted by pbcustom98


Even if i went with an Eggo...do they have them in blue..the bling bling factor is one of the most important factors So I need Blue/Black. IF they do, then Ill see which one goes better.

Daniel

You can buy a $2-3 pack of dye at a local fabric or arts supply store... get RIT dye, follow directions....



This is Zyperion's evolution II, used RIT dye. I've dyed my HALO B red, too, following instructions. Just get a clear egg as a base, remove shells, etc. etc.

here's the thread: http://www.automags.org/forums/attac...&postid=773912

[CrazyLad]

For Powdercoating:

Go to the dealers forum...Theres this guy named paintballbeaver (i think thats his name) he powercoats stuff for cheap.

[pbcustom98]

Powdercoating

I was told that if they do a bad job, the tolerances in the rail my be affected...so im looking to anno it..but its kinda expensive ont he places ive looked. and they cant anno chrome to a color so they have to strip it which is alot more expensive!!? problems!
Daniel

[coolcatpete]

save your money and get the ule trigger and the y- fram when ever they come out

[pbcustom98]

Y-Frame

Originally posted by coolcatpete
save your money and get the ule trigger and the y- fram when ever they come out

ULE Trigger...maybe...Y-Frame possible No. The trigger isnt angled right for the frame and it looks like its gonna be uncomfortable. I dont think the z-grip and i-frame are 2 things that should be combined. I may buy one...but its 2nd to last on my list right now.

Daniel

[Ryknow]

Get your stuff anod and not powdercoated.. out of all the reponses and stuff in this thread I cant belive nobody has listed any place at all tog et your stuff done. Click on the link in my sig, It will take you to Xtreme Paintball, they anno now and several people on this forum have gotton their gun done. I have, I know Heat has, Datapimp gets his drops anodized there and everything. Check em out, they do great work and its a lot cheaper than many other places.