ULE Trigger Moving Forward!!!

[Jerhew]

Re: Specs for drilling out valves...

Originally posted by Bad_Knees
Tom or anyone who cares to answer this...

What are the specs to drill out the valve to accept the two o-ring setup? Just need bit size and depth. What o-rings to use in the two o-ring setup?

AO,

Who is going to setup to machine the valves?

I plan to get an X-Valve in the future but would like to beta test the trigger on my SS retros.

BK

yes i'm sure this needs to be reiterated...
anyone planning on doing this for all of us poor 1 oring people?

i'd do it on my drill press if i was confident i wouldn't screw it up...
doesn't the bottom of the hole have to be flat though?
if so you can't just use a drill bit...
other than that it seems pretty straight forward...
can we get the specs on the tooling/bits used to do this?

wobbles82: Ok, I have my RT-Pro, it came with the RT X Valve and such, its purdy, but anyway do I have to mess with the on off or is he saying that its already set? Whats this bout changing the shims again?

you're all set if you have an x-valve

[Jerhew]

oh ya
and btw
SWEET!

[dcmander]

So questions:

1) Will this be included w/ the Xvalve when it is released? I think Tom shoulda stated this again in this update, make sure nothing changed.

2) What input pressure should we feed this thing?

Follow up question to that...If it only needs..lets say 800psi...Isn't it kinda unnecessary to have an adjustable tank if you are planning on buying this mod?

Need some confirmation Tom/AGD.

[jaylock33]

Quick question if you set the Lvl X with an extremely tight carrier setup, is it possible that this will restrict the lvl X enough that when the trigger is short stroked it won't send the current ball far enough forward for a second ball to drop in?

[AGD]

At the moment we dont know if we will be including the trigger in the Xvalve or not. If it causes problems with too many people we will not. If it goes great we will but there will be an up charge.

AGD

[GatoLoco]

Originally posted by GatoLoco
sorry if this has been asked a million times, but i could not find the answer. About how reactive does it remain (a half, a third of the stock?)

[Jerhew]

from everything i've read
it sounds like it's just reactive enough to be super light and not extremely easy to shortstroke
i imagine it's along the lines of a super soft but snappy hinge cocker
from the sounds of things, if you can short stroke it at all, then it's obviously less reactive than a normal rt.
i imagine some people will prefer the regular rt trigger over the ule trigger...but heck you can have your original rt on/off back in in 30 seconds flat

[chronic john]

As stated before, some valves will not take this mod. If you have two orings down in the bottom of your on/off hole you are good to go. It might be possible to drill out valves that have one o-ring but we will not be doing that. I am sure a bunch of people will step up to do it for a fee.

that means any valve classic or rt or e-mag as long as it has 2 o-rings as stated . this is gonna be a nice mod for intellafed guys for sure i cant wait for the lighter pull with that mag snapynesssssss. ahhhhhhhhhh

[cockersuk14]

if this trigger doesnt work with a stock mag on/off pin what will it work with Z Valve? aftermarket on/off?

[TransMan]

Would this work on an Oldschool RT???

[reddck420]

the answer is yes it will fit all valves with 2 o-rings . the the guys with the rt valves with one o-ring can have it machined somewhere other than agd .

[reddck420]

oh and its not a trigger its a new on-off with shims that are adjustable .

[Jerhew]

and
Tom said this is no good for a classic valve
and it doesnt have anything to do with compatability...
classics have 2 orings (atleast all the ones i know of, correct me if im wrong)
he mentioned shootdown and something else that i can't remember right now... it didn't sound good unfortunately
sorry classic guys

[magmonkey]

as long as I get an ok from agd we, will do the milling to the valves so they accept the second o ring

I want to check with Tom before hand because I don't want to void peoples war.

Alan Gliniak
Destructive Customs

[Jerhew]

very cool man
keep us posted
as soon as you get the ok i'd like to have mine done so it's ready for the AO release