sfl question, mainly for AGD, but if you can help go for it

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • azzkikr
    Lord and Master
    • Nov 2000
    • 592
    #1

    sfl question, mainly for AGD, but if you can help go for it

    well its rather simple, say I was to buy an sfl emag that came with a warp left(for righties). how could I get a warp right(you guess it, for lefties) and a center breach to match the sfl milling.

    also would AGD do whats necesarry to install the ace if it didn't have it?

    thanks AZZKIKR
    mess with the best, DIE like the rest.
    when it absolutely, positively has to shoot well everytime
    http://www.theangelguy.com
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      You really can't. AGD does the milling for the breeches (they go on the Xmags now). Shocktech did the others, and since they no longer make them, I doubt you'll find one anywhere.

      As for the ACE upgrade, ask LoadSM5 or Psychoballer. They'd know for certain. But AFAIK, they will install the ACE for free.

        Comment

        • ntn4502
          Environmental Geologist
          • Aug 2002
          • 1637
          #3
          I think that the warp right is still in stock in the store.

          Just call and say you want to send in the gun for ACE and theyll set you up with an RA number, and if you get lucky it will take 2-3 weeks...which is free ofcourse

          Drink Wine

            Comment

            • Load SM5
              Scruffy Administrator

              • Oct 2000
              • 6772
              #4
              The ACE is free as is the on/off switch. You can get any breech for an X-mag for your SFL but there won't be any SFL milling on it. But it looks fine without the little milled SFL on the side. If you do get any X-mag breeches you will need the smaller diameter X-mag bolt instead of the larger SFL bolt.


              Moorewatch

              If you read this, thank a teacher.
              If you read this in English, thank a soldier.

                Comment

                • Dragoon
                  Team Dragoons
                  • May 2001
                  • 580
                  #5
                  Just to make sure it's clear, the breaches for the Extreem (non-cnc xmags) have the same milling as the SFL breach, just no "SFL' engraved in the side.

                  Also, I sent my warp left breach in when I got my ACE installed and they bored it out so I can use the SFL LX bolt that I have.

                  The only thing I have to do now is get the warp breach anno'ed so it matches the marker.

                  Hope this helps

                  Douglas

                    Comment

                    Previous template Next
                    Working...