..so just a few more things?

[rkjunior303]

Soo.. I think my mag is just about complete.. I am thinking:

- Chrome Intelliframe
- X-Valve
- Chrome (if avail) ULE Mainbody

If the Chrome ULE isn't available, I will probably do a Black ULE w/ a Black Intelliframe.. I'd rather the chrome tho! I defintely need to tighten up the hoses a bit, as well.

Whatcha think?

[AcemanPB]

If you want chrome you could buy an un-annoed raw ULE body, polish it then get a clear coat on it.

[ugabiged88]

IMO you need to get rid of the green body rail.

[Hucklbry]

NO way.... Keep the green. Gives it attitude if you ask me.

[MayAMonkeyBeYourPinata]

chrome omega rail and a chrome barrel damn do i love chrome

[rkjunior303]

hehe thanks for the suggestion but the green rail stays.. you really can't see it very well but the fittings are green along with the KAPP DZ3 and the Grips, which are green (Hogue wood i think).. The barrel on it is also a Green/Black/Gold splash Spart Parts AA. I think it works.. I dunno, though. Looks like I may end up going with a e-mag so I may be dumping this to help finance that!. We'll see.

[JAM]

keep the rail, the green is sweet, but get a shorter line from the valve to the vert adapter.

[rkjunior303]

Plan on it.. I wanna get it done first then i'll worry about that - granted its only $10 worth of line heh.

[Cryer]

Keep the green rail and the green hose elbows. Black ULE body, Black I-frame, Xvalve, get a green garrel, and a green loader...
That should be it...




wait....More Lisa Harvey stickers

[Cryer]

Originally posted by rkjunior303
Plan on it.. I wanna get it done first then i'll worry about that - granted its only $10 worth of line heh.

On my setup, I used a 5" hose and QD from my valve to vert ASA. Perfect lenght.
Also, you might consider running the hose straight from the on/off ASA to the tank. Just bring it straight up, in front of and over the foregrip.

[Farnja]

Green rail stock or annoed...if stock where from?

[rkjunior303]

I dig the way the AA Splashed barrel looks. I also have a Dye Aluminum that I use, depending on paint... A freak type kit would probably work too.. If I end up with the ULE body I'll have to invest in some new barrel(s) anyways

The rail was an ANS rail.

[rkjunior303]

from the other side.

Here is a better pic from the other side.