ACE Prototype Test at CCPB

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • the123
    JJ's Master
    • May 2001
    • 736

    #1

    ACE Prototype Test at CCPB

    It's 8pm and I sit down to the computer to check the forums.
    I see this post: http://www.automags.org/forums/showt...threadid=16320 So already an hour late, I toss my stuff in the truck and speed off about 60 or so miles down to CCPB to play. I'm glad I did! I had the honor this evening of getting to test the new E-Mag Extreme with ACE for a couple of games. I have nothing but good things to say about how well it worked.
    First test with the vertical feed module was with a rev without batteries to simulate the worst case scenario by out shooting the hopper every few balls. Worked flawless. Next with batteries, it was pure pleasure to shoot. The superbolt and lightness of the body makes for a totally different feel of a standard e-mag. I'm sure a lot of people will appreciate the almost 0 recoil the marker has.
    No chops even when TRYING. I was tilting the gun sideways BEGGING the gun to chop by shaking it and it wouldn't.
    And last I also got to shoot the lovely blue lady catcher the AGDJon was holding in all those picts with a HALO attached!!!
    I must say I feel quite special right about now.
    Thanks Tom and Thumbs Way Up on the ACE!
    Brian
  • AGD
    The man from AGD

    • Oct 2000
    • 5916

    #2
    Yep, say goodbye to Mr Chop!! The first game the two tone paint was triggering the sensor at different positions so that needed fine tuning. Most eyes have trouble with high contrast two tone shells. In this case it was orange and white that had problems. In the shop we shot green and blue with no problems. I switched to all grey for the last games and had no problems.

    Remember this was with NO BATTERIES in the hopper. It constantly jammed, ran dry and needed to be shaken back to life.

    Goodbye Mr Chop, can't say it's been nice knowin ya and don't let the door hit you on the way out....

    AGD
    sigpic

    Comment

    • Tunaman
      Specialized AGD Tech

      • Dec 2000
      • 8643

      #3
      "Goodbye Mr Chop, can't say it's been nice knowin ya and don't let the door hit you on the way out....

      AGD"


      Coming from the Man himself, I must say this is the sweetest thing I have ever heard! Good work Tom!
      Email me for low prices on ALL AGD Products and more. [email protected]
      Tunamart

      Comment

      • Prezents
        UNITED WE STAND
        • May 2001
        • 1149

        #4
        Mr "Chop"

        Amen Brother

        Comment

        • AGD
          The man from AGD

          • Oct 2000
          • 5916

          #5
          giving this an up so people see it. AGD
          sigpic

          Comment

          • DarkPhoenix
            Advanced Fire Support
            • May 2001
            • 719

            #6
            geeze, been gone a couple of weeks and I feel that I am behind the times already. Could anyone please explain how this has come to fruition?

            "The BEAST"
            "No-Rise" E-mag
            Level 10 Bolt
            AGD Flatline 91cu in/4500psi
            Black HALO B

            "Red Heatseeker"
            Red to Clear Fade Freak Factory Impulse
            68/4500psi Max-Flo
            Red HALO B

            Comment

            • Dragoon
              Team Dragoons
              • May 2001
              • 580

              #7
              Great news!

              I've always said that few things can ruin a good game as fast as a chopped ball.

              So I've sold my Emag in order to pick-up an SFL or extreme with the ACE. So where do I sign-up for one?!

              It's also good to hear about the 0 recoil with the new bolt.

              I love the fact that we seem to be in a revolutionary spurt at the moment. So much new stuff to think about and look forward to. My playing will only get better because of all these new toys. Not because they make me a better player, they just don't hamper me and allow me to play up to my full potential.

              Keep shaking things up AGD!

              Douglas.

              Comment

              • ah137
                Registered User
                • Nov 2000
                • 569

                #8
                If I upgrade to the modular body, Could I also put an ACE in it. Or will I have to buy a new board to. Or can AGD just flash my board with a new version. Thanks Hills

                See everyone soon, at the class/tour!!!
                NVE-mag
                Certified Airgun Tech.


                Comment

                • cphilip
                  Former Moderator

                  • Jun 2026
                  • 16216

                  #9
                  Originally posted by ah137
                  If I upgrade to the modular body, Could I also put an ACE in it. Or will I have to buy a new board to. Or can AGD just flash my board with a new version. Thanks Hills

                  See everyone soon, at the class/tour!!!
                  Me too wanna know this!


                  AGD, where we are so good we can do it with only ONE tube!

                  cphilip.com

                  Comment

                  • Dubstar112
                    Dubstar111x
                    • Feb 2001
                    • 2321

                    #10
                    will this system ACE work with warpfeed?... im confused about this..
                    AO #765
                    CCM Series 5
                    Prerelease Impulse
                    Hyperframed Warped Mag w/flatline tank
                    Feedback.


                    Good to know that somone of Tom's status seeks "relief" from a sport he helped create. A sport now ruled by a single patent.

                    Comment

                    • Scorch
                      Just a nice guy in a mask
                      • Oct 2000
                      • 337

                      #11
                      THIS is what I've been waiting for.

                      Someone asked me how I could be a 'Mag shooter at heart and not shoot a 'mag.

                      I have been waiting for a technology step by AGD. I am very happy to see that this wait may be coming to an end. ACE... low recoil... reduced cycling weight... reduced weight... Thank you!

                      Show me +/-1 sustainable consistency at 285fps and I'm back like Fat man at McDonald's! and I have fat friends!

                      Scorch

                      Comment

                      • AGD
                        The man from AGD

                        • Oct 2000
                        • 5916

                        #12
                        The ACE system is contained in the modular body so if you upgrade to the body later you can get the ACE too!!

                        AGD
                        sigpic

                        Comment

                        • deded
                          so.fresh.and.so.clean!
                          • Nov 2001
                          • 371

                          #13
                          uh oh

                          Now there is no way I am not getting an Emag... as soon as they come out with the ACE (and I get some money together) I'm gettin' one of them.

                          Plastic nubbins + warp + ACE = no squegee needed on the field?

                          I always lose mine anyway.
                          If at first you don't succeed, skydiving is not for you.

                          Comment

                          • slateman
                            Registered User
                            • Oct 2001
                            • 1346

                            #14
                            deded: That's funny, I just lost mine on Sun.... at the field!!

                            I hate to ask this but... How much is an E-mag with ACE gonna cost?
                            BrockSampson "I see dead people..."



                            and once I see them, I make sweet, sweet love...

                            Comment

                            • the123
                              JJ's Master
                              • May 2001
                              • 736

                              #15
                              cost of ACE

                              I believe Tom said it was going to be about $150 more than a standard e-mag. Some people might say, "holy cow! that much!"
                              I say, "whats a squeegie?"
                              I'd pay the extra few dollars.
                              Brian

                              Comment

                              Working...