Cutting down the PF tube

[Russ]

If you so it in a mill, like I did, be sure to find a dowel pin as close to the inner diameter of the tube as you can.

defintely, use a .750" dowel pin, or just a piece of stock...

[afrankart]

I think a .752 or .753 was the best fit for me.

[j.t.]

After seeing this thread I decided to give it a try. Its hard to see the difference it made in this pic...

[tony3]

I cut mine down with a pipe cutter. I cut mine almost too short, but I got an adjustable elbow so no big deal. It is way better. With the pipe cutter creating a lip on it, I just took my dremel and sanded it off. Be using it for 5 months and it works fine. Plus with an egg and lvl 10, I aint chopping

[BajaBoy]

I used a Metal cutting band saw for my Pf body. But then i bought my emag and needed to cut it down within tht week bc i had a game so my dad did it with this air powered cutting saw (i dunno the name)

I wouldnt sugjust using a dremel, if your gunna do something then do it right with the right tools.