accuracy isnt too much of a problem, but gas effeciency is terrible, and velocity plummets. Its bad.
what happens when my balls are WAY too small?!
Collapse
X
-
-
As others have said, you should find that your efficiency is terrible. However, you should also notice that the consistency between shots is better. You can crank and crank on the velocity adjuster and make very little difference. The more you try to increase the velocity the more air escapes around the paintball. As long as you have the velocity in this range it will be MORE consistent. You'll pay for it with FAR less shots per fill.
Hey Hitech your starting to sound like me! - AGD
Hitech is the man.... :eek: - Blennidae
The only Hitech LubricantComment
-
If all you have is that bore size and don't have anything else to shoot. You could put a small dot of nail polish on the inside of the barrel. Similar to using a ball detent. Now, before I get flamed for this... 1) It does not replace a good multi bore/multi barrel setup. 2) You will still get poor efficiency. 3) You will probably eventually wear through the nail polish.
Now, when using a drop of nail polish I recommend a small drop. If it is too big, you may chop or just knock it loose in the first couple of shots.
Disclaimer: I won't take any responsibility if this causes any damage to your barrel. This is the old school way we used to fit paint to large bore barrels if we didn't have the right size available.
Thank you freak set!Comment
-
just ride the wave. you might laugh you might cry but try and have a good time
throw your paintballs. stab people with a paintbrush. or maybe you could trade paint? sorry i dont usually like to ask people questions like this in these situations when i feel bad for them but why didnt you do a little research? see if the seller will buy em back from you or maybe you could sell em back half the case or whatever you havent used
Comment
-
All I shoot anymore is PMI premium , it is a small bore paint you need a .686-.684 barrel to shoot it good . A lapco Autospirit shoots it very well ."Anyone can slap together a high-end electro , where as building a high-end mechanical is truely an art form" - nuclear zombieComment
-
I shoot that stuff too, but I use a .689 insert for my Freak. My very first shot seems to be a double ball, but I think that is because my ball detent isn't all that great. But I haven't had any problems with consistency. But then again....I don't recall any balls rolling out of my barrel???-Every Thing Is A PileComment
Comment