do emag bodies fit on the classic mag rails?

[ZCute]

do emag bodies fit on the classic mag rails?

[frntplayer]

i thought

emags didnt have rails

[ZCute]

also whats the difference from a warp left body and and a normal hopper left/right?

[frntplayer]

the dif is

that the power feed is longer tube coming out of the gun than the warp which is shorter

[wobbles82]

Heh. Ok an emag body will fit on a classic rail. A classic mag body will not fit onto an emag or rt pro rail, its too long. And also the PF connection is setup so you put your pf plug in one end and the warp on the other, making a bit of a target. The warp is a direct connection to your marker and warp feed.

[govnamac]

The difference is an emag/rt pro body has a round connector piece, whereas a minimag/automag body has a rectangular one. The emag bodies fit into a auto/minimag rail, but because of the rectangular PIM, those bodies don't fit on an emag without modifications.

[paint magnet]

And its the Xmag that doesn't have the rail.

[FalconGuy016]

Originally posted by paint magnet
And its the Xmag that doesn't have the rail.

And the micro emag

[Dave]

Yes, the Emag bodies will fit on the mag rails, but! In my experience, the post of the Emag body has been a bit too tall to fully seat the body into the rail, therefore I had to file it down a bit...this was true for two completely different bodies and rails I tried.

-Dave