Powerfeed to Centerfeed barrels?

[person88]

I just got my no rise body, and instead of having to purchase a new barrel(s), i was wondering if i could convert my powerfeed barels to centerfeed. If i can do this, what would be the easiest way to do this? PLMK

[fire1811]

yes you can do it.

easiest way i found is to take your body off and
line the hole i the barrel up with the no rise hole.
then take a marker and mark though the hole where the pin holds the barrel remove barrel and drill

just be sure not to drill to deep, do a little at a time

also you wont be able to use this barrel on a hopper right body after you drill it(usually)

good luck and take your time

[rehme]

when i converted my barrels when i took the body off and aligned the holes and put a rubber band around the barrel/body so the barrel would stay in place.

make sure you do a little by little when i first did it with my dremel i just put a little hole in the barrel put it back on my gun see if the twist lock assy. locked and it did so i made the hole deeper