Macro problem

[Kellen_p8nt]

OK im sitting here fidling with my mag (z frame) reading about macro line bursts on the forums.

Heres my dillema.the macro between my foregrip and DZ2 makes a 90* bend. I figure this is probably not a good thing.

The other problem is I can't find Macro that will reach from the DZ2 to the valve.

ANyone know where I can get some or a big steel brainded line with swivel fitting(if those are good)

[Skoad]

i had a piece of macroline that was about 2 inches long and it was more than a 90 degree bend from my asa to my gas thru foregrip.

Never blew on me for a year and ahalf.



also if your looking for longer pieces of macro, pm Tunaman or go to any reputable pro shop and they should have just a giant spool of it

[i_baked_cookies]

i have like a 2 inch peice of macro and its pretty bent... and if it explodes im gonna be mad

[JAM]

you're fine... at least from your picture, the macro CURVES about 90 degrees, but it is not BENT. just make sure it's ends are fully inserted into the elbows.

[EsPo]

Originally posted by smee
i have like a 2 inch peice of macro and its pretty bent... and if it explodes im gonna be mad

get ready to be mad.. macro bursts on me quite often.. is a pain considering how it dumps my entire tank in like 4 seconds.