Automag Freak

[Mrmacdude]

are there any diffrences? how does the insert go in???

[cockermongol]

you have to JB weld it in.

[ChucktheMAGician]

They slide in the front b4 you put the tip on. Differences in backs would be that most have grooves for PowerFeed right and left and you need to ask for CenterFeed ones. There are people on AO that will mill the groove out and make a CF one out of a PF one tho.

[Mrmacdude]

Originally posted by ChucktheMAGician
They slide in the front b4 you put the tip on. Differences in backs would be that most have grooves for PowerFeed right and left and you need to ask for CenterFeed ones. There are people on AO that will mill the groove out and make a CF one out of a PF one tho.

i meant to ask, where does the nubbin go???

[ChucktheMAGician]

The nubbin is in the same place as regular barrels.

[Mrmacdude]

im not gettin this, how does the insert go in if the nubbin is there?

[ChucktheMAGician]

Originally posted by ChucktheMAGician
They slide in the front b4 you put the tip on.

[BajaBoy]

ehh it looks like its Really badly scratched and scuffed but its not.. its just a lil dirty.

but the insert gose a little past the 2nd oring

[Mrmacdude]

oh! it didnt occur to me that the actually barrel part of the barrel starts AFTER the 2nd oring. Thanks, baja.

[cphilip]

Originally posted by cockermongol
you have to JB weld it in.

Please do not give advice that it dangerously wrong and will result in ruining someones equipment. If you mean something as a joke then please identify it as such. Use some smilies. They free. Or use the j/k indication. People may take you seriously and do this.

FYI That is NOT CORRECT!!!

[Mrmacdude]

Originally posted by cphilip

FYI That is NOT CORRECT!!!

thanks for that, i wasnt sure