N00b question here...

[FutureMagOwner]

look at the top of the tank where the regulator is you still have the pin in there right? when you have an asa it has a pin and the regulator has a pin as you screw it in the pin in the asa pushes the one on the regulator which opens it up and lets out the gas the only way that it wouldnt let gas out that i can think of at the moment is that either the pin is too short or there is no air(check the gauge on the side of it you may have a leak and it ran out)

[rehme]

Originally posted by RangerBoii226
None at all and the tank is allthe way screwed in

it sounds like you might need a new asa

[durtysoufcraka]

poke the top of the nitro tank thingy (the little pin that shuts off the gas) w/a screw driver to see if any gas comes out if the asa were to open up the tank....just dont put your face or any skin in direct path of the N2 streaming from the tank. to maek sure its the tank

[RangerBoii226]

Yea, I just bought I new asa and everything works fine.

[GhillieGuy]

Re: N00b question here...

Originally posted by RangerBoii226
Hey I'm asking this question for a friend because I have a flatline so I really don't know. He wants to know how to screw in a pin valve Nitro tank and unscrew it. Thanks

edit:jk, if this is not apropriate mods lmk and i'll remove it

[RangerBoii226]

How did you get that pic of me? YOU SPYING ON ME!!! AHHH

[FutureMagOwner]

god can we stop with the stupid ebaumsworld pictures especially since most of them never even came from ebaumsworld in the first place

[RangerBoii226]

You took the words right out of my mouth

[GhillieGuy]

Ya but its just a lttle forum humer

[RangerBoii226]

Oh I know, but it shouldn't be directed at me. That wasn't me before when asking about the pin valve.

[RangerBoii226]

Also, I believ yuo mnet ot say humor. Jeez catn yuo lrean hw to speel?

[GhillieGuy]

[RangerBoii226]